Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-06-2012, 11:20 PM   #16
2010limited   2010limited is offline
 
Join Date: Mar 2012
Posts: 33
Ok So after screwin' around some more I found my intake leak. The gasket between the intake runner and the cylinder was torn and leaking bad.

Replaced it. And re installed the mikuni. It idles perfect and ran awesome at around 1/4 throttle, but anything more and it fell flat on its face. So I think you NEED the bigger jets in it for it to work.

So I swapped back to the original carb, and got the machine running. It still is running kinda crappy, but I have to play around with the air fuel and such.

When I give the quad a quick rev, it kind of holds at high rpm, then drops a bit slower. So i'll have to adress the issue.


 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:13 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.