|
11-05-2009, 07:39 PM | #1 |
Join Date: Nov 2007
Location: Tejas
Posts: 834
|
Front brake squealing
Front brake squeals really bad when the brake lever is pulled back. The bike rolled over 10,000 miles today; so there's an accomplishment. Does this mean the pad is bad and need to be replaced? The bike is a Hi Bird 250 (GY2). And I only see one brake pad (unlike Lifan's two pads).
__________________
Chinabikeless |
|
11-05-2009, 07:59 PM | #2 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
These bikes are famous for the brake pad overlying the disk so there is a ridge built op where the pad does not make contact. Remove pads, cut or grind off the ridge, add anti-squeal to the back of the poads, and you're good to go.
__________________
Happy to serve. |
|
11-05-2009, 10:48 PM | #3 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
11-05-2009, 10:51 PM | #4 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
When do I get my Moderator Badge, and the big paycheck that comes with it?
__________________
Happy to serve. |
|
11-05-2009, 11:00 PM | #5 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
Spud
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|
|