04-01-2023, 12:39 PM
|
#1 |
|
Join Date: Jun 2021
Posts: 28
|
18mm sight glass replacement?
So to replace the sight glass am I to understand that I need epoxy? I ordered replacements that appear to have the metal bit with the glass too that were 18mm on Amazon and they came with o rings, so is it possible to just use the oring? Are they all the same? All the YouTube videos I found seem to say to use a bit of calking and a c clamp, I was hoping to avoid even taking it off the bike so I don't have to bleed the thing again.
|
|
|
04-01-2023, 09:34 PM
|
#2 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,313
|
No model/year reference, but I assume this is a Hawk? You have another thread from 2018 about a Hawk, I think (CGclone).
But wait ! After re-reading your post, wondering if this is a brake cylinder reservoir or oil level sight glass?
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
|
|
|
04-03-2023, 07:59 AM
|
#3 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,561
|
Definitely need more information. Pictures? What bike?
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|
 |
|
|
Linear Mode
