New carburetor

Hirales · 08-12-2020, 07:19 PM

Can anybody help me figure out how to put this on i just got in today and have no clue what goes where and what pieces I dont need if someone could help 9t would be greatly appreciated

dirtbkr188 · 08-12-2020, 07:47 PM

If you took the carb out of the box and it looks exactly like the picture above, you have to remove the intake manifold and flip it around 180°. The carb is upside-down in the pic above.

Hirales · 08-12-2020, 08:27 PM

Quote:

Originally Posted by dirtbkr188

If you took the carb out of the box and it looks exactly like the picture above, you have to remove the intake manifold and flip it around 180°. The carb is upside-down in the pic above.

Ok i have it like this so far but I do not know where all the houses are suspost to go

Bruces · 08-12-2020, 09:32 PM

Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb .

Hirales · 08-12-2020, 10:23 PM

Here's another picture

Hirales · 08-12-2020, 10:31 PM

[QUOTE=Bruces;344392]Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb

No they don't look nothing alike there were alot more hoses on the original carb. I put to gas hose next to the pink one that you mentioned and the drain one on the bottom thats just on clamp thats on the engine there kn the picture. But where does that pink hose go thats next to the gas?

Bruces · 08-12-2020, 11:12 PM

It’s just a vent ,it doesn’t go anywhere ,just attach it like the original picture shows

Hirales · 08-13-2020, 02:25 PM

Quote:

Originally Posted by Bruces

It’s just a vent ,it doesn’t go anywhere ,just attach it like the original picture shows

So the pink one is just a vent or should I hook up this hose to it. If not do you know where this hose is supposed to go

Bruces · 08-13-2020, 03:30 PM

That’s an emissions hose ,it should go straight into the garbage unless you need it to be legal where you live .

Hirales · 08-13-2020, 03:44 PM

Quote:

Originally Posted by Bruces

That’s an emissions hose ,it should go straight into the garbage unless you need it to be legal where you live .

Ok so just take the hose off all the way

Hirales · 08-13-2020, 03:53 PM

Or can I just zip tie it to the frame

Bruces · 08-13-2020, 04:20 PM

You can do what you wish with it ,I don’t see the point in riding around with extra junk on your bike that isn’t connected anymore ,but if you like it by all means zip tie it to the frame and once a year you can buy it a birthday cake or a dozen roses if you prefer .

Bruces · 08-13-2020, 04:24 PM

Looking at your pictures it appears you haven’t checked your valve clearances yet ,judging by the perfect paint on the valve cover caps ,you might want to figure that out next if you actually want to ride your bike with it running well .

Hirales · 08-13-2020, 05:05 PM

Quote:

Originally Posted by Bruces

Looking at your pictures it appears you haven’t checked your valve clearances yet ,judging by the perfect paint on the valve cover caps ,you might want to figure that out next if you actually want to ride your bike with it running well .

What do you mean by the valve clearance where is that at

Bruces · 08-13-2020, 07:03 PM

On your bike it’s actually in 2 places and probably at zero .You should be able to google valve clearance adjustment for a Honda z50 ,just do what it says and you will be fine .

08-12-2020, 07:47 PM	#2
dirtbkr188 Join Date: Aug 2009 Posts: 510	If you took the carb out of the box and it looks exactly like the picture above, you have to remove the intake manifold and flip it around 180°. The carb is upside-down in the pic above.
	0

08-12-2020, 09:32 PM	#4
Bruces Join Date: May 2018 Posts: 1,581	Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb .
	0

08-12-2020, 10:23 PM	#5
Hirales Join Date: Aug 2020 Posts: 14	Here's another picture
	0

08-12-2020, 10:31 PM	#6
Hirales Join Date: Aug 2020 Posts: 14	[QUOTE=Bruces;344392]Did the original carb not look very much the same ?the hoses go in pretty much the same locations .The one from the tank goes to the vertical nipple beside the pink hose in the picture you posted above ,and the other hose is the bowl drain which goes on the bottom of the carb No they don't look nothing alike there were alot more hoses on the original carb. I put to gas hose next to the pink one that you mentioned and the drain one on the bottom thats just on clamp thats on the engine there kn the picture. But where does that pink hose go thats next to the gas?
	0

08-12-2020, 11:12 PM	#7
Bruces Join Date: May 2018 Posts: 1,581	It’s just a vent ,it doesn’t go anywhere ,just attach it like the original picture shows
	0

08-13-2020, 03:30 PM	#9
Bruces Join Date: May 2018 Posts: 1,581	That’s an emissions hose ,it should go straight into the garbage unless you need it to be legal where you live .
	0

08-13-2020, 03:53 PM	#11
Hirales Join Date: Aug 2020 Posts: 14	Or can I just zip tie it to the frame
	0

08-13-2020, 04:20 PM	#12
Bruces Join Date: May 2018 Posts: 1,581	You can do what you wish with it ,I don’t see the point in riding around with extra junk on your bike that isn’t connected anymore ,but if you like it by all means zip tie it to the frame and once a year you can buy it a birthday cake or a dozen roses if you prefer .
	0

08-13-2020, 04:24 PM	#13
Bruces Join Date: May 2018 Posts: 1,581	Looking at your pictures it appears you haven’t checked your valve clearances yet ,judging by the perfect paint on the valve cover caps ,you might want to figure that out next if you actually want to ride your bike with it running well .
	0

08-13-2020, 07:03 PM	#15
Bruces Join Date: May 2018 Posts: 1,581	On your bike it’s actually in 2 places and probably at zero .You should be able to google valve clearance adjustment for a Honda z50 ,just do what it says and you will be fine .
	0