i require your wisdom on a vader gen 2

Adrenalcookie · 08-09-2019, 01:31 PM

What size bolts are the engine mounts? im shopping for class 12.9 ones but i see many different sizes and have no idea on which one to pick, Also are there any exhausts that do not require modification to fit?

Whisky · 08-09-2019, 05:25 PM

120 and 130mm x 8mm bolts. Exhaust from a Honda dax, z50, z70 I'm sure there's some others, someone else will chime in.

RedCrowRides · 08-10-2019, 09:48 AM

If you can let me know if you want a low pipe or a high pipe i can link some that we know for sure will fit the Gen2 Vader. Just to give you an idea, i own a fairly modified Gen2 Vader and this is the exhaust i run : https://www.ebay.com/itm/Racing-Exha...AAAOxyQj9RSTzL

A more basic low pipe is this one :ttps://www.ebay.com/itm/Stainless-Steel-Exhaust-Pipe-Muffler-For-Honda-Monkey-Z50-Z50A-Bikes-Skyteam-2/253333849871?hash=item3afbdfc70f:g:FIwAAOSwttVaRju V

There are a few more options out there, but these two are generally the most popular.,and both are confirmed to fit on Gen2 Vaders by Owners here .

Hats off to Whisky for getting you the engine mount bolt sizes, i had them written down " somewhere" but was unable to locate it like i was my exhaust system info.

SilverBullet51 · 08-10-2019, 01:10 PM

I'm running a kepspeed gp1 for a dax, I bought it off motorkit's website. It's a bit pricey compared to others but the quality and fitment are spot on. Shipping from overseas was surprisingly fast. Only took 5 days for me. I like the one redcrow linked but I wanted carbon fiber.

Whisky · 08-10-2019, 05:28 PM

I'm running the same as silverbullet51, all exhaust from kepspeed are very nice but sure there are cheaper decent exhaust. Thanks Redcrow, I only knew right off the bat because I just got done swapping in my 190.

Adrenalcookie · 08-15-2019, 11:12 AM

are there any high pipes?

08-09-2019, 01:31 PM	#1
Adrenalcookie Join Date: Jul 2019 Posts: 34	i require your wisdom on a vader gen 2 What size bolts are the engine mounts? im shopping for class 12.9 ones but i see many different sizes and have no idea on which one to pick, Also are there any exhausts that do not require modification to fit?
	0

08-09-2019, 05:25 PM	#2
Whisky Join Date: Aug 2018 Posts: 286	120 and 130mm x 8mm bolts. Exhaust from a Honda dax, z50, z70 I'm sure there's some others, someone else will chime in. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks Last edited by Whisky; 08-09-2019 at 06:43 PM.
	0

08-10-2019, 09:48 AM	#3
RedCrowRides Join Date: Jun 2018 Location: Florida Posts: 759	If you can let me know if you want a low pipe or a high pipe i can link some that we know for sure will fit the Gen2 Vader. Just to give you an idea, i own a fairly modified Gen2 Vader and this is the exhaust i run : https://www.ebay.com/itm/Racing-Exha...AAAOxyQj9RSTzL A more basic low pipe is this one :ttps://www.ebay.com/itm/Stainless-Steel-Exhaust-Pipe-Muffler-For-Honda-Monkey-Z50-Z50A-Bikes-Skyteam-2/253333849871?hash=item3afbdfc70f:g:FIwAAOSwttVaRju V There are a few more options out there, but these two are generally the most popular.,and both are confirmed to fit on Gen2 Vaders by Owners here . Hats off to Whisky for getting you the engine mount bolt sizes, i had them written down " somewhere" but was unable to locate it like i was my exhaust system info. __________________ 2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L
	1

08-10-2019, 05:28 PM	#5
Whisky Join Date: Aug 2018 Posts: 286	I'm running the same as silverbullet51, all exhaust from kepspeed are very nice but sure there are cheaper decent exhaust. Thanks Redcrow, I only knew right off the bat because I just got done swapping in my 190. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	1

08-10-2019, 01:10 PM	#4
SilverBullet51 Join Date: Apr 2017 Location: Plainwell, MI Posts: 60	I'm running a kepspeed gp1 for a dax, I bought it off motorkit's website. It's a bit pricey compared to others but the quality and fitment are spot on. Shipping from overseas was surprisingly fast. Only took 5 days for me. I like the one redcrow linked but I wanted carbon fiber.
	0

08-15-2019, 11:12 AM	#6
Adrenalcookie Join Date: Jul 2019 Posts: 34	are there any high pipes?
	1