Snapped lug bolt, Rhino 250

beyondhonesty · 04-21-2017, 06:47 AM

Snapped the lug bolt (torqued to 35lbs) , need to source a replacement in a hurry.

I took the bolt to H Depot and it's very similar to an flange M10-1.25 by 25mm

Unfortunately the bolt won't tread correctly.

Please help me source new bolts.

Mudflap · 04-21-2017, 07:11 AM

That's the size I thought they were. Threads messed up in the hub? You could always put a slightly smaller bolt through with a nut on the back side until you can find one that fits.

beyondhonesty · 04-21-2017, 07:18 AM

Hub is good, I've used the other bolts to make sure the threads are good.

I'm going to have to try that smaller bolt idea.

Thanks

SilverBullet51 · 04-21-2017, 08:06 PM

I think you need a 1.50 pitch bolt, not the 1.25 pitch.

beyondhonesty · 04-21-2017, 08:52 PM

That is correct, bolt m10-1.50 pitch worked perfectly! length is 30mm.

Thank you everyone

beyondhonesty · 04-22-2017, 08:40 PM

Back on the trails...

Time for a bath

04-21-2017, 06:47 AM	#1
beyondhonesty Join Date: Apr 2017 Posts: 20	Snapped lug bolt, Rhino 250 Snapped the lug bolt (torqued to 35lbs) , need to source a replacement in a hurry. I took the bolt to H Depot and it's very similar to an flange M10-1.25 by 25mm Unfortunately the bolt won't tread correctly. Please help me source new bolts. __________________ 12/2016 Rhino 250
	0

04-21-2017, 07:18 AM	#3
beyondhonesty Join Date: Apr 2017 Posts: 20	Hub is good, I've used the other bolts to make sure the threads are good. I'm going to have to try that smaller bolt idea. Thanks __________________ 12/2016 Rhino 250
	0

04-21-2017, 08:52 PM	#5
beyondhonesty Join Date: Apr 2017 Posts: 20	That is correct, bolt m10-1.50 pitch worked perfectly! length is 30mm. Thank you everyone __________________ 12/2016 Rhino 250
	0

04-21-2017, 07:11 AM	#2
Mudflap Join Date: Sep 2014 Posts: 1,885	That's the size I thought they were. Threads messed up in the hub? You could always put a slightly smaller bolt through with a nut on the back side until you can find one that fits.
	1

04-21-2017, 08:06 PM	#4
SilverBullet51 Join Date: Apr 2017 Location: Plainwell, MI Posts: 60	I think you need a 1.50 pitch bolt, not the 1.25 pitch.
	0