Bashan Storm Mods, YouTube link!

Cravin01 · 04-16-2018, 09:11 PM

Here we go!

Another link to a link.

http://chinariders.net/showthread.php?t=21028

Cravin01 · 07-05-2018, 11:43 PM

Another video link for you guys, Digital clust will soon follow.

http://chinariders.net/showthread.ph...344#post285344

tomrom · 07-06-2018, 07:11 AM

Hi, How did you get the Storm 250 sticker off? Mine seems to be clear coated over.

Cravin01 · 07-06-2018, 07:22 AM

Your right it is clear coated, I used a heat gun to get it a little hot and it peals right off.

be aware that the plastics are painted and are white underneath so don't get it too hot, I scratched a small piece of paint off trying to get the sticker to pealing on the edge. I touched up the paint with a permanent marker to hide it.

Ariel Red Hunter · 07-06-2018, 07:38 AM

Quote:

Originally Posted by Cravin01

Another video link for you guys, Digital clust will soon follow.

http://chinariders.net/showthread.ph...344#post285344

On drilling stainless steel; I was hired once to repair a stainless steel/fiberglass rudder on boat that had just sailed across from Norway. (Yes, sailed. You know, sails, those big cloth sheets they hang off of a pole?) I seeked advice before I agreed to do the job. "A lot of patience, slow speed, short bites, and Evaporated Milk." "Evaporated Milk?" "Yes, I don't know why it works, just that it does." Do not think it went easily. It took me 4 hours to drill 6 holes through the 1 1/4 inch rudder shaft. And a quarter can of Evaporated Milk....ARH....

Sochin · 07-06-2018, 10:32 AM

ARH, yeah them crazy Norskies when THEY get stranded.....they do it really well too. How do I know? I'm born there

Ariel Red Hunter · 07-06-2018, 01:32 PM

Quote:

Originally Posted by Sochin

ARH, yeah them crazy Norskies when THEY get stranded.....they do it really well too. How do I know? I'm born there

He didn't get stranded, the original design was flawed and he was the designer

, so I worked on it in the boatyard where it had spent the winter. Either the milk casian or butterfat in the milk is why it worked....ARH

P.S. It was a patch job, it didn't really fix the problem, but he just "Wanted to get by for the season."

Cravin01 · 07-07-2018, 08:30 PM

Update for those using this video for a aftermarket exhaust upgrade:

I found that the header pipe was leaking exhaust due to the flange pulling the pipe toward the side where I decided to just leave the bolt hole, I ended up notching the other side to allow it to pull down evenly without the binding and it seated up nice and even quieting down the bike a bit more.

Also the plastic fender melted in the video as you had seen, I was able to use the bolt and spacer supplied with the exhaust and added four more washers to get the clearance need and will be patching the melted area with a small piece of plate metal to support and protect the fender from this point forward.

I'll be sure to show a quick update and what was done in the next video.

Thanks for watching!

Cravin01 · 07-08-2018, 08:32 PM

Put the update on the exhaust in the vlog and went through rejetting the carb.

http://chinariders.net/showthread.ph...569#post285569

Cravin01 · 08-04-2018, 05:50 PM

New Carb finally came in and now its time to get running again, New vid on page 2 of link!

http://chinariders.net/showthread.ph...517#post287517

Cravin01 · 08-22-2018, 06:29 PM

The speedometer mod is complete! Vid is a little long but I didn't want to do 2 vidz on the same mod.

http://chinariders.net/showthread.php?t=21028&page=2

04-16-2018, 09:11 PM	#1
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Bashan Storm Mods, YouTube link! Here we go! Another link to a link. http://chinariders.net/showthread.php?t=21028
	0

07-05-2018, 11:43 PM	#2
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Another video link for you guys, Digital clust will soon follow. http://chinariders.net/showthread.ph...344#post285344 __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	1

07-06-2018, 07:11 AM	#3
tomrom Join Date: Apr 2018 Location: Vermont Posts: 56	Hi, How did you get the Storm 250 sticker off? Mine seems to be clear coated over. __________________ 2017 Bashan Storm
	0

07-06-2018, 07:22 AM	#4
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Your right it is clear coated, I used a heat gun to get it a little hot and it peals right off. be aware that the plastics are painted and are white underneath so don't get it too hot, I scratched a small piece of paint off trying to get the sticker to pealing on the edge. I touched up the paint with a permanent marker to hide it. __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	0

07-06-2018, 10:32 AM	#6
Sochin Join Date: Jul 2017 Location: Montucky Posts: 209	ARH, yeah them crazy Norskies when THEY get stranded.....they do it really well too. How do I know? I'm born there __________________ 1991 Kawasaki KLR250
	0

07-07-2018, 08:30 PM	#8
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Update for those using this video for a aftermarket exhaust upgrade: I found that the header pipe was leaking exhaust due to the flange pulling the pipe toward the side where I decided to just leave the bolt hole, I ended up notching the other side to allow it to pull down evenly without the binding and it seated up nice and even quieting down the bike a bit more. Also the plastic fender melted in the video as you had seen, I was able to use the bolt and spacer supplied with the exhaust and added four more washers to get the clearance need and will be patching the melted area with a small piece of plate metal to support and protect the fender from this point forward. I'll be sure to show a quick update and what was done in the next video. Thanks for watching! __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	1

07-08-2018, 08:32 PM	#9
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Put the update on the exhaust in the vlog and went through rejetting the carb. http://chinariders.net/showthread.ph...569#post285569 __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	0

08-04-2018, 05:50 PM	#10
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	New Carb finally came in and now its time to get running again, New vid on page 2 of link! http://chinariders.net/showthread.ph...517#post287517 __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	0

08-22-2018, 06:29 PM	#11
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	The speedometer mod is complete! Vid is a little long but I didn't want to do 2 vidz on the same mod. http://chinariders.net/showthread.php?t=21028&page=2 __________________ Visit me on YouTube at "Project Next"! https://www.youtube.com/channel/UC6KTCi2GVbfRDv-2XCqHhsg?view_as=subscriber 2017 Bashan Storm Keihen PZ30 Pumper Carb,115 main jet,35 pilot jet, gutted factory exhaust, Sambo Digital Speedometer,LED blinkers, H4 headlight,D.I.D X-ring chain 428,17/42 sprockets,UNI cone filter.
	0