07-15-2014, 11:04 PM | #1 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,816
|
Old and New
Just a pic I took of my Chevy and my old 1952 Ford F2 that I gave to my daughter and son in law.
Jake got the 3.54:1 Dana 70 installed and had a new drive shaft made for it. He also put in a dual master cylinder system. He still needs a bit of practice on adjusting the carbs and clutch, but he's moving right along on it
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
07-16-2014, 01:31 AM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
That F2 looks terrific; I doubt that I could have parted with it. It looks like Mater's brother.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-16-2014, 08:48 AM | #3 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,816
|
It was hard to do, but I wanted my garage back.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
07-16-2014, 10:58 AM | #4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
What is the Dana 70 out of? Does it have Power Lok?
I did some brief reading on the Dana 70, and I was shocked to learn about the 10.5" ring gear! GM used the Dana 70 in Topkick trucks, so they must be brutally strong. Jake will never break it.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-16-2014, 12:29 PM | #5 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Your son-in-law is a lucky guy. I really like that '52 Ford F2.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-16-2014, 01:49 PM | #6 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,816
|
I found the Dana at a swap meet many years ago and gave $75 for it. No idea what it was out of.
Spud-I had a lot of fun with it. With the old 4.86 rear axle in it, I could have 3/4 cord of wood in the back and start off in 3rd on a grade. Moved my oldest back and forth to college several times with it, too. The built six eats flat heads for lunch.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
|
|
|
|