easy way to get more power?

nick780 · 04-13-2008, 09:05 AM

i have a roketa atv-61 300cc, i want to get more power out of it, but i was just gonna see if there is a way to do this cheap and easy before i go get a pipe and jet kit?

DesertDog · 04-13-2008, 04:26 PM

:o hey nick780, where do you get pipes and jets for these china quads, i make my own, not the jets.
mark.

DesertDog · 04-13-2008, 04:30 PM

Quote:

Originally Posted by DesertDog

:o hey nick780, where do you get pipes and jets for these china quads, i make my own, not the jets.
mark.

i also have a viva 300cc preditor, a KMD-86 300cc (junk quad ), it dose'nt have any power what so ever, my preditor quad awsome, kmd-86 a waste of my money, hope no one else has a lemon

nick780 · 04-13-2008, 06:15 PM

i know my bike is pretty much a copy of the polaris predator except its a 300cc not a 500cc, another guy i know that has the same bike got a pipe and jet kit for a honda 300ex i believe. i think the pipe is more like the predators so im waiting untill he gets them installed before i think about getting them.

he said he knows the honda jet kit will work,( again im waiting to see ). but it does seem like our engines are a clone of a honda, and our bikes body and steering ,is from a predator.

DesertDog · 04-16-2008, 12:04 AM

i got lost there nick780
you have the same quad i do atv-61, mines a preditor (Viva)300cc , i put a dial-a-jet kit on mine since i live up in thin air country, it's from thunder products, seams to be working like they say it should, i put mekuni big round jets in the carb they snug-up ,
> but i too want more power , thinking on trying a performance CDI if i can match one up.
> next would be pipe like the dirt bikes have small round ?
keep me posted on what your friend finds out
desertdog

nick780 · 04-16-2008, 06:01 AM

ill keep you up tp date when i hear something, my friend has been working alot and said he hasnt had time to mess with it yet. and what brand bike did you buy your jet kit for?and did everything fit ok?

DesertDog · 04-16-2008, 08:45 AM

the jet kit is from ThunderProducts.com, called dial-a-jet.
i think i got one for the Honda 3ootrx/350trx something like that, that seemed to math right up, i reduced the main jet to a 122mm, factory was a 130mm jet, you have to reduce 2 or more sizes to get the dial-a-jet to work properly, then i dialed my jet in to the 12 o-clock position, i am at 5500ft above sea level, thats why the smaller main jet, and the carb thats on mine is a 42mm airbox side and a 34mm to the engine side , vaccum slider, throttle needle clip set in the second slot from the bottom,
gotta go to work see ya
desertdog

nick780 · 04-16-2008, 05:02 PM

ok thanks, did you replace the needle too? i just tried to get an oil filter for my bike,and cant find one that will fit ,someone told me a 300ex filter will work ,,,but it doesnt, if you have any input on the oil filter also ,i would appreciate it!

DesertDog · 04-16-2008, 09:02 PM

Quote:

Originally Posted by nick780

ok thanks, did you replace the needle too? i just tried to get an oil filter for my bike,and cant find one that will fit ,someone told me a 300ex filter will work ,,,but it doesnt, if you have any input on the oil filter also ,i would appreciate it!

:?:
no i did'nt replace the needle,
nothin on the oil filter yet , need to get one soon, i'll call my distributor see what he'z got.
what color is your's, i dont know how to upload a photo or i'ld post mine . it's the black one with orange

nick780 · 04-16-2008, 09:47 PM

mine is also black and orange, i hope you can find something about an oil filter, i cant believe im having trouble getting an oil filter!

DesertDog · 04-16-2008, 11:45 PM

:o , dont be suprized on that, just take it in to checkers or a local honda dealer have em match it up, i'll try my distributor 1st. what's your dealer say ? from the guy you bought it from . :?:
our checkers here sells alot of motorcycle filters and oil, so if my dealer sayz 5 month back order i'm going into town

nick780 · 04-17-2008, 05:59 AM

i got my bike online, i couldnt find a roketa dealer near me, and i do the work on my bike myself, i took my oil filter to a honda dealer yesterday and he couldnt match it up, but neither dealer i took it to seemed like they looked very hard.

DesertDog · 04-17-2008, 11:13 PM

:x bet your gettin mad
hold on to the old one you can all wayz wash them out and reuse them for acouple of times
i've got a pic of me on my quad in the gallery sect. last page , last file desertdog,
I'll be back i'm going to go look at this site for parts

nick780 · 04-19-2008, 07:02 PM

i think i found someone to get me an oil filter, ill let you know.

DesertDog · 04-20-2008, 01:11 AM

Quote:

Originally Posted by nick780

i think i found someone to get me an oil filter, ill let you know.

kool

please do so i can order a case

04-13-2008, 09:05 AM	#1
nick780 Join Date: Feb 2008 Posts: 37	easy way to get more power? i have a roketa atv-61 300cc, i want to get more power out of it, but i was just gonna see if there is a way to do this cheap and easy before i go get a pipe and jet kit? __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-13-2008, 04:26 PM	#2
DesertDog Join Date: Apr 2008 Posts: 782	pipe&jetting :o hey nick780, where do you get pipes and jets for these china quads, i make my own, not the jets. mark.
	0

04-13-2008, 06:15 PM	#4
nick780 Join Date: Feb 2008 Posts: 37	i know my bike is pretty much a copy of the polaris predator except its a 300cc not a 500cc, another guy i know that has the same bike got a pipe and jet kit for a honda 300ex i believe. i think the pipe is more like the predators so im waiting untill he gets them installed before i think about getting them. he said he knows the honda jet kit will work,( again im waiting to see ). but it does seem like our engines are a clone of a honda, and our bikes body and steering ,is from a predator. __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-16-2008, 12:04 AM	#5
DesertDog Join Date: Apr 2008 Posts: 782	pipes and jet kits i got lost there nick780 you have the same quad i do atv-61, mines a preditor (Viva)300cc , i put a dial-a-jet kit on mine since i live up in thin air country, it's from thunder products, seams to be working like they say it should, i put mekuni big round jets in the carb they snug-up , > but i too want more power , thinking on trying a performance CDI if i can match one up. > next would be pipe like the dirt bikes have small round ? keep me posted on what your friend finds out desertdog
	0

04-16-2008, 06:01 AM	#6
nick780 Join Date: Feb 2008 Posts: 37	ill keep you up tp date when i hear something, my friend has been working alot and said he hasnt had time to mess with it yet. and what brand bike did you buy your jet kit for?and did everything fit ok? __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-16-2008, 08:45 AM	#7
DesertDog Join Date: Apr 2008 Posts: 782	dial-a-jet the jet kit is from ThunderProducts.com, called dial-a-jet. i think i got one for the Honda 3ootrx/350trx something like that, that seemed to math right up, i reduced the main jet to a 122mm, factory was a 130mm jet, you have to reduce 2 or more sizes to get the dial-a-jet to work properly, then i dialed my jet in to the 12 o-clock position, i am at 5500ft above sea level, thats why the smaller main jet, and the carb thats on mine is a 42mm airbox side and a 34mm to the engine side , vaccum slider, throttle needle clip set in the second slot from the bottom, gotta go to work see ya desertdog __________________ DesertDog
	0

04-16-2008, 05:02 PM	#8
nick780 Join Date: Feb 2008 Posts: 37	ok thanks, did you replace the needle too? i just tried to get an oil filter for my bike,and cant find one that will fit ,someone told me a 300ex filter will work ,,,but it doesnt, if you have any input on the oil filter also ,i would appreciate it! __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-16-2008, 09:47 PM	#10
nick780 Join Date: Feb 2008 Posts: 37	mine is also black and orange, i hope you can find something about an oil filter, i cant believe im having trouble getting an oil filter! __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-16-2008, 11:45 PM	#11
DesertDog Join Date: Apr 2008 Posts: 782	oil filter :o , dont be suprized on that, just take it in to checkers or a local honda dealer have em match it up, i'll try my distributor 1st. what's your dealer say ? from the guy you bought it from . :?: our checkers here sells alot of motorcycle filters and oil, so if my dealer sayz 5 month back order i'm going into town __________________ DesertDog
	0

04-17-2008, 05:59 AM	#12
nick780 Join Date: Feb 2008 Posts: 37	i got my bike online, i couldnt find a roketa dealer near me, and i do the work on my bike myself, i took my oil filter to a honda dealer yesterday and he couldnt match it up, but neither dealer i took it to seemed like they looked very hard. __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0

04-17-2008, 11:13 PM	#13
DesertDog Join Date: Apr 2008 Posts: 782	oil filter :x bet your gettin mad hold on to the old one you can all wayz wash them out and reuse them for acouple of times i've got a pic of me on my quad in the gallery sect. last page , last file desertdog, I'll be back i'm going to go look at this site for parts __________________ DesertDog
	0

04-19-2008, 07:02 PM	#14
nick780 Join Date: Feb 2008 Posts: 37	i think i found someone to get me an oil filter, ill let you know. __________________ 2007 Roketa atv-61 300cc , 2003 suzuki LT-Z400,,jet kit,,white brothers exhaust
	0