Go Back   ChinaRiders Forums > General > Riding > Sightings
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-05-2011, 04:01 PM   #1
ejcycles   ejcycles is offline
 
ejcycles's Avatar
 
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
2006 Lifan LF200GY-6..... Hey Jim...

Hi All

I thought Jim {our Moderator} may find this of interest as may others. Over the years we have seen many Chinese & other countries bikes come into the USA. I remember when Jim bought his Lifan "LF200GY-6". I had a guy call me the other day asking about parts for one here in Ohio. As many of you know I'm in Mantua, Ohio. Well we went through the VIN stuff and it's a Lifan motorcycle for sure, LF3 are the first 3 digits in the VIN. He explained the bike to me and I started looking on the China Lifan site, it sounded just like a LF200GY-6. Well he brought the bike to the shop yesterday... it took some time explaining on why parts would be so hard to get... but after I explained to him that even a per say a Honda or Yamaha that wasn't imported into the USA you couldn't get all the parts for it here. He told me he hasn't ever been asked so many questions just to get parts for a motorcycle, so I explained all of this to since he found me listed as a Lifan dealer and that, I still am.

So anyway, In the State oh Ohio Lives a 2006 Lifan LF200GY-6, with the last six digits 000001 making it the 1st. LF200GY-6 made in 2006. I must admit seeing one in person you really get to see the differences between the LF200GY-2, LF200GY-5 & the LF200GY-6. I must admit after seeing this bike in person I wish they would have imported the 200GY-6 instead of the 200GY-5.
__________________
Thanks, Bruce @ Endless Journey Cycles
"Phone Calls Only" ~330-274-0098~
Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST.
Dealer for: Lifan, Crossrunner ATVs.
http://www.endlessjourneycycles.net


 
Reply With Quote
Old 08-06-2011, 02:12 AM   #2
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Wow, unit #1.

It's still not worth anything to the rest of the world, just to goofs like us.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 08-07-2011, 11:50 AM   #3
Oengus   Oengus is offline
 
Join Date: Oct 2009
Posts: 826
What about the GY200-5A? Did you have an opportunity to stock those?

I guess Lifan imported some, the site says they will be restocked? I have yet to see one advertised anywhere and nobody has shown up on a forum claiming to own one, that I have seen.


 
Reply With Quote
Old 08-08-2011, 07:15 AM   #4
ejcycles   ejcycles is offline
 
ejcycles's Avatar
 
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
@ Oengus

The LF200GY-5A has not ever been imported to the USA as of yet.
I was told the LF200GY-5A was taking the place of the LF200GY-5 due to it {GY-5A} having a steel fuel tank. The EPA wouldn't let them import a Dual Sport/Enduro that had a plastic tank any longer.

Makes even me wonder, I know the LF200GY-6 has a steel tank, it's much better looking, and I think it would sell better.
__________________
Thanks, Bruce @ Endless Journey Cycles
"Phone Calls Only" ~330-274-0098~
Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST.
Dealer for: Lifan, Crossrunner ATVs.
http://www.endlessjourneycycles.net


 
Reply With Quote
Old 08-10-2011, 01:01 AM   #5
Oengus   Oengus is offline
 
Join Date: Oct 2009
Posts: 826
I think the permeability standards for tanks is a work in process and has been for a while, I see no new regulations, but I could be just missing it, or the GY5 simply does not pass on it or they know it will not.. The use of plastic tanks has not been restricted. There are other models that have plastic tanks that have 2011 EPA certificates, at least thirty two to be exact. I say at least because some models are coded as “M” or “P” under tank material and many more models leave that field blank. That format or those fields go back to 2008 at least and half the data is left blank and none of the testing data fields has ever been propagated with values. In other words the entry or rating for "Fuel Tanks Permeation" is empty on all EPA models, it is simply blank, which leads me believe that they are about to regulate on it but have not yet.

The claim that they were not allowed to import those because of the plastic tank is questionable.

They have an EPA certificate on the GY-7 what are they saying about that bike, other then maybe October 2011?
BLFNC0.25GY7-001 LIFAN LF250GY-7, they have had an EPA certificate since the beginning of the year on the GY-7.


 
Reply With Quote
Old 08-10-2011, 11:05 AM   #6
ejcycles   ejcycles is offline
 
ejcycles's Avatar
 
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
@ Oengus

First: I'm not here to argue.

Second: This is off topic for this thread, you should have started a new thread.

Third: This was told to me by someone and I was told it has to do with bikes that are street legal, not racing or off road.

Fourth: I could care less what the EPA says in writing, they change things all the time to accommodate themselves to stop things from being imported.
__________________
Thanks, Bruce @ Endless Journey Cycles
"Phone Calls Only" ~330-274-0098~
Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST.
Dealer for: Lifan, Crossrunner ATVs.
http://www.endlessjourneycycles.net


 
Reply With Quote
Old 08-10-2011, 10:39 PM   #7
Jim   Jim is offline
 
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
Hey that's cool I haven't seen mine in quite some time, but I did like it a lot more then the 5. As far as I know a steel tank is actually required here too, but then again, none of the China bikes other then the Konker/Qingqi, Saga, and now the 400's were really imported to Canada as street legal.

The only thing I didn't like about that bike over the 5 was the seat, the seat on it is pretty hard.


 
Reply With Quote
Old 08-10-2011, 10:46 PM   #8
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Oengus, I agree with Bruce. He started a thread on a specific GY-6, and it has drifted in a different direction. I appreciate your comments and knowledge about all kinds of China bikes, and I encourage you to start a specific discussion about EPA approvals, tank materials, etc.

Thanks for your continued contributions to the forum.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 08-11-2011, 04:51 AM   #9
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
I also thought the GY-6 looked better than the other Lifan, dual sport bikes, Bruce. Did the owner tell you how he acquired a GY-6 in the United States? :?:

Spud
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 08-11-2011, 12:00 PM   #10
ejcycles   ejcycles is offline
 
ejcycles's Avatar
 
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
@ Jim, W&G & Spud... Thanks

@ Spud
Yes he said he is the 3rd owner of the bike, he has no idea how it got here but It's titled & plated for the road. He is very happy with it so far, he picked it up for $600.00... Good price!
__________________
Thanks, Bruce @ Endless Journey Cycles
"Phone Calls Only" ~330-274-0098~
Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST.
Dealer for: Lifan, Crossrunner ATVs.
http://www.endlessjourneycycles.net


 
Reply With Quote
Old 08-12-2011, 12:02 AM   #11
Jim   Jim is offline
 
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
That is a good price, of course my perspective is based on the market here, but it's hard to go wrong for that.


 
Reply With Quote
Old 08-12-2011, 12:22 AM   #12
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by ejcycles
@ Jim, W&G & Spud... Thanks

@ Spud
Yes he said he is the 3rd owner of the bike, he has no idea how it got here but It's titled & plated for the road. He is very happy with it so far, he picked it up for $600.00... Good price!
Indeed, he got a good price. I bet the GY-6 made it's way across the border, from Canada.

Spud
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 08-12-2011, 03:22 PM   #13
ejcycles   ejcycles is offline
 
ejcycles's Avatar
 
Join Date: Oct 2006
Location: 11481 State Route 44 Mantua, Ohio 44255
Posts: 1,112
Quote:
Originally Posted by SpudRider
Indeed, he got a good price. I bet the GY-6 made it's way across the border, from Canada.

Spud
That is exactly what I was thinking, but I'm not sure what year Canada received the first 200GY-6. I thought it was in 2008, but the distributor may have received them earlier than they started selling them.
__________________
Thanks, Bruce @ Endless Journey Cycles
"Phone Calls Only" ~330-274-0098~
Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST.
Dealer for: Lifan, Crossrunner ATVs.
http://www.endlessjourneycycles.net


 
Reply With Quote
Old 08-12-2011, 03:43 PM   #14
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Recently several members of these forums have acquired Zongshen 200GY-A motorcycles. To the best of my knowledge, the 200GY-A bike was never imported into the United States, so I must assume theses bike made their way across our southern border from Latin America.

Based upon Jim's photos of it, I always liked the looks of the Lifan GY-6. I don't want to sidetrack this thread, but I feel compelled to ask a few questions. What is the current status of American Lifan? Do you have a tentative date for the arrival of the GY-5A bikes? If you have some inside information regarding these matters, I would love for you to start a new thread, and update us regarding the planned operations at American Lifan.

Spud
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 08-12-2011, 10:40 PM   #15
Jim   Jim is offline
 
Join Date: Mar 2007
Location: Abbotsford, BC, Canada
Posts: 4,880
I think you're right that Coast to Coast didn't have the gy6 until 2008, but I don't know about the others.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:35 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.