03-06-2017, 12:59 PM
|
#1 |
|
Join Date: Sep 2016
Location: FL
Posts: 95
|
Hawk NGK Plug question
When I ordered my Hawk, I ordered a handful of upgrades also. So I finally got around to installing the NGK 2202 (DPR8EIX-9) today, but it does not match up with the Torch D8RTC that came out. The plug wire end of the old plug is much smaller than the new one. There is a brass insert in the plug wire, but it is threaded in.
Was I supposed to order a new plug wire, have they changed design, or am I missing something?
__________________
2016 RPS Hawk 250, exhaust, Uni Filter, Mikuni VM-26 clone w/ 120 main & 30 pilot, MSR shifter, 17/45 sprockets, JT chain, digital cluster... |
|
|
03-06-2017, 01:14 PM
|
#2 |
|
Join Date: Feb 2017
Location: North Alabama
Posts: 62
|
If I understand part of the question, unscrew the silver cap on the new plug for the spark plug wire to slip on. Wrench on the hex portion of the plug and pliers to unscrew the silver cap. It's not real tight on there.
|
|
|
|
03-06-2017, 01:19 PM
|
#3 | |
|
Join Date: Sep 2016
Location: FL
Posts: 95
|
Quote:
Thank you, fits much better now. 
__________________
2016 RPS Hawk 250, exhaust, Uni Filter, Mikuni VM-26 clone w/ 120 main & 30 pilot, MSR shifter, 17/45 sprockets, JT chain, digital cluster... |
|
|
|
|
|
|
 |
|
|
Linear Mode
