Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 01-02-2017, 12:36 AM   #1
DS79   DS79 is offline
 
Join Date: Jan 2017
Posts: 1
Hi-Bird 250 trans issue

I picked this atv up in a box. All the young kid told me is he pulled it apart because the headgasket was leaking it wouldn't start anymore. Long story short, ordered a jug, piston, and gasket set and put it together. Crank turns nicely in neutral but once I put it in gear to get it to top dead center and set the valves, the engine would not turn. Tried everything I could think of to spin it over using the output shaft and nothing helped. Decided to pull the filter screen and found a few small pieces of metal and the end of the dipstick that apparently twisted off. Now none of these pieces look like major parts failures, mostly look like shims but I haven't pulled it apart yet to really find out. That is why I am here, how bad are these to split? I have the extra gaskets to do it so that is not the issue. Just have no idea how bad this process is and would like it to run if that is at all possible.
Thanks for any help,
DS79


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.