Go Back   ChinaRiders Forums > Media/Reviews/Classifieds/Sponsors > Reviews
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 08-02-2016, 01:15 AM   #1
tonyson   tonyson is offline
 
tonyson's Avatar
 
Join Date: Jul 2016
Location: Galt, Nor-Cal
Posts: 52
Zongshen Storm Cruiser 250CC First Oil Change

Today, I finally wore my DIY hat and started the oil change process for the Zongshen. Similar to another "hobby" of mine, I learned a lot after joining a friendly forum. Sincere thanks to the forum members who gave me advice, I approached this process with confidence.
Now, before I proceed any further (and possibly cause damage to my bike), I'd like to show some pics for your constructive criticism.
My two main questions are: 1) did I remove the correct oil drain bolt?
2) Did the pan measurement of about 3 quarts of drained oil just about right?





__________________
The problem isn't that Johnny can't read.
The problem isn't even that Johnny can't think.
The problem is that Johnny doesn't know what thinking is; he confuses it with feeling.
---Thomas Sowell
................................
Zongshen Storm V-250
.......................................
The Zong and Winding Road


 
Reply With Quote
Old 08-02-2016, 01:47 AM   #2
BlackBike   BlackBike is offline
 
BlackBike's Avatar
 
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
It appears you struck oil. And crude at that now take that amount, replace, then be ready to check the site glass/dipsticks oil level. Will need to check and top off and also check it as the bike is on the level and not on the stand. That said the best thing for it, clean oil. You'll even feel a difference in the shifting.

Also, rock it over so it all comes out.

And also good to heat the oil before draining (run it around the block). Hot oil flows better than cold oil (Watch out, it burns skin too).
__________________
*****************************************
2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE
2017 Suzuki V Strom 650 XT
"We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~


 
Reply With Quote
Old 08-02-2016, 03:50 AM   #3
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436
3 quarts ?!
Yamaha XV250
Bone dry (overhaul) 1.8L | Normal:1.4L | Changed the filter 1.6L http://www.metric-conversions.org/vo...uid-quarts.htm
__________________


 
Reply With Quote
Old 08-02-2016, 09:20 AM   #4
tonyson   tonyson is offline
 
tonyson's Avatar
 
Join Date: Jul 2016
Location: Galt, Nor-Cal
Posts: 52
Thanks. I did run it before draining.
I'm still struggling with the quantity of drained oil. It was leaking a bit before.
Oh, and is the oil filter on the right-hand side with two bolts?


 
Reply With Quote
Old 08-02-2016, 06:34 PM   #5
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436

===
Good guides
http://www.youtube.com/playlist?list...v7LLonC1FuJBa4 Spanish caption on 1st, then click auto translate into English...
__________________



Last edited by humanbeing; 08-17-2016 at 03:33 AM.
 
Reply With Quote
Old 08-03-2016, 12:08 AM   #6
tonyson   tonyson is offline
 
tonyson's Avatar
 
Join Date: Jul 2016
Location: Galt, Nor-Cal
Posts: 52
Thanks, guys. Sight shows clear oil at the proper level. Oil filter has been replaced too. I only put about 1.5 liters and now, I'm guessing, the leak was due to too much oil that the sight couldn't show anything because it was way above the max line. But I'm just guessing. Again, my sincere thanks.


 
Reply With Quote
Old 08-03-2016, 12:31 AM   #7
BlackBike   BlackBike is offline
 
BlackBike's Avatar
 
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
Is a wonder it even ran with 3 quarts. It was leaking alright, out of every pore I imagine.
__________________
*****************************************
2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE
2017 Suzuki V Strom 650 XT
"We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~


 
Reply With Quote
Old 08-03-2016, 12:47 AM   #8
tonyson   tonyson is offline
 
tonyson's Avatar
 
Join Date: Jul 2016
Location: Galt, Nor-Cal
Posts: 52
Quote:
Originally Posted by BlackBike View Post
Is a wonder it even ran with 3 quarts. It was leaking alright, out of every pore I imagine.

I drove it for about 10 miles and not a single leak... fingers crossed.


 
Reply With Quote
Old 08-03-2016, 06:38 AM   #9
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436
~3 quarts is for the bigger bro: 535 /400
These small V-twin shouldn't run with such amount...
__________________


 
Reply With Quote
Old 08-03-2016, 11:16 AM   #10
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Thanks for sharing the pics. I've never seen a drain plug quite like that. Also, it's cool to see how the spherical rod ends provide the forward controls.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 08-20-2016, 12:49 PM   #11
tonyson   tonyson is offline
 
tonyson's Avatar
 
Join Date: Jul 2016
Location: Galt, Nor-Cal
Posts: 52
Rode it to work 60 miles r/t. It's leaking like a drop per hour. Did I not tighten the bolt enough? I thought about replacing the washer but I read that I don't have to. The oil sight window still shows good oil level.

On another note, I can barely reach 80kph on 4th gear. If I put it on 5th, it decelerates to the mid-60s to low 70s.
From a full stop, I can barely keep up with 40mph traffic.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:41 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.