04-04-2018, 10:31 AM | #1 |
Join Date: Apr 2018
Posts: 3
|
Go Kart will not move
Hi guys, new to the forum.
I bought a used Chinese 125 Go Kart (SuperMach), chain drive, F/N/R, engine says 'Shiner'. The guy I bought if from said his son put it in R will moving forward at full speed. So.....it does not move now in F or R. Engine runs fine. I there a protective part (like a shear pin) that tends to break on these things when someone does a reverse drop? Just hoping to get some advice on what to look for before I tear into it. Thanks. |
|
04-04-2018, 12:11 PM | #2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Good heavens! May we see pics of the complete kart and engine? Perhaps we can provide some guidance from there.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
04-04-2018, 01:15 PM | #3 |
Join Date: Apr 2018
Posts: 3
|
I'll get a better pic tonight. At work now, these are on my phone.
|
|
04-04-2018, 01:28 PM | #4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,701
|
Have you tried disconnecting the linkage and shift it by hand at the engine? May just need some adjustment.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
04-05-2018, 11:16 AM | #5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
If you decide to tear into it, there are plenty of good vids on Youtube that detail the transmission. Dismantling is similar to the XR50.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
04-05-2018, 06:26 PM | #6 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I suggest pricing a new engine. May be more cost effective than repairs. Likely something inside the transmission has snapped and would require you to split the cases.
You may want to pull the front sprocket cover off and make sure that the sprocket is not stripped. The clutch assembly should be under the opposite cover.
__________________
You meet the nicest people on a Honda Clone. |
|
04-06-2018, 09:15 AM | #7 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,701
|
New engine is around $200-230. Transmission gear set under$35.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
04-07-2018, 03:26 PM | #8 |
Join Date: Apr 2018
Posts: 3
|
Can anyone recommend a safe place to buy parts? I got ripped off last year by http://www.sunlpartsonline.com. He has about 5 websites. Took my money and only sent a few of the parts.
|
|
04-11-2018, 06:15 PM | #9 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
Dune buggy
Hello.... that is shineray...... looks like a KANDI MODEL as wel.... google KANDI or just go to JASSMOTORS..... IN CALIFORNIA..... TRUSTED DEALER... the same motor as in the atvs and other stuff.. where are you??? eagleatv is another good site..
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
|
|
|
|