Coolster 110 cc 2013 help

Wangbat · 04-30-2022, 03:14 PM

I have a 2013 110 cc coolster. One of the bolts that holds the engine to the frame has vibrated out. I need to replace the bolt. I don't know much about engines and am not sure what to search for to buy the bolt I need. I can post pics if needed. Any help would be appreciated.
Thank you.

david3921 · 04-30-2022, 10:58 PM

Coolster has a website with diagrams and parts lists.

https://coolster.com

You'll have to register to get access but you should be able to find the bolt size. After that, go to a nearby big box store to get a bolt. TSC and Ace are common sources.

Wangbat · 05-01-2022, 11:00 AM

Thank you for the help.

dirtbkr188 · 05-01-2022, 12:02 PM

Which bolt is missing? The one that goes on the top of the engine, or the one that goes on the back of the engine?

Can you measure the total width between the engine mounts where the missing bolt goes and post up the number here?

david3921 · 05-01-2022, 04:21 PM

If you can't find it on the website, show a picture of the location of the missing bolt. I can look at what bolt is at the same location on my grandkid's 125ccTaotao as most of these machines are pretty close.

Wangbat · 05-04-2022, 01:11 PM

Thanks guys, it was the lower bolt. I measured it and found one at the local Menards. As it turns out I need to replace the Carburetor. The link for the coolster page helped me locate the proper sized one and should have it in on Thursday. Thanks for all the help.

04-30-2022, 03:14 PM	#1
Wangbat Join Date: Apr 2022 Posts: 3	Coolster 110 cc 2013 help I have a 2013 110 cc coolster. One of the bolts that holds the engine to the frame has vibrated out. I need to replace the bolt. I don't know much about engines and am not sure what to search for to buy the bolt I need. I can post pics if needed. Any help would be appreciated. Thank you.
	0

04-30-2022, 10:58 PM	#2
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,031	Coolster has a website with diagrams and parts lists. https://coolster.com You'll have to register to get access but you should be able to find the bolt size. After that, go to a nearby big box store to get a bolt. TSC and Ace are common sources. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

05-01-2022, 04:21 PM	#5
david3921 Join Date: Feb 2009 Location: Michigan Posts: 1,031	If you can't find it on the website, show a picture of the location of the missing bolt. I can look at what bolt is at the same location on my grandkid's 125ccTaotao as most of these machines are pretty close. __________________ 2012 Kawasaki Versys 1984 Honda Magna V65 2016 Rhino 250 2016 Tao Tao 125D
	0

05-01-2022, 11:00 AM	#3
Wangbat Join Date: Apr 2022 Posts: 3	Thank you for the help.
	0

05-01-2022, 12:02 PM	#4
dirtbkr188 Join Date: Aug 2009 Posts: 507	Which bolt is missing? The one that goes on the top of the engine, or the one that goes on the back of the engine? Can you measure the total width between the engine mounts where the missing bolt goes and post up the number here?
	0

05-04-2022, 01:11 PM	#6
Wangbat Join Date: Apr 2022 Posts: 3	Thanks guys, it was the lower bolt. I measured it and found one at the local Menards. As it turns out I need to replace the Carburetor. The link for the coolster page helped me locate the proper sized one and should have it in on Thursday. Thanks for all the help.
	2