08-12-2011, 11:52 AM | #1 |
Join Date: May 2011
Location: Independence, Mo
Posts: 25
|
ATA-250D Clutch lever on engine
Picked up another Tao Tao ATA-250D from a guy for $200. I already have an identical one so this one was really intended for parts however I started to play with it. Got the carb cleaned out and it fired right up. The clutch cable was ruined so I picked one up from a guy around the corner that sells all the parts for the chinese atvs. I have discovered that there is no real "spring" to the clutch lever on the engine casing. I've never tore into a clutch before. Anybody have any knowledge of these. It will hard shift through the gears but I know that's not good...lol Is there some sort of spring or something needed for this lever inside. This thing runs like a champ so now I'd really like to just make a roller out of it.
|
|
08-12-2011, 01:43 PM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
The "spring" is really the clutch springs in the clutch pack under the cover. When you pull the lever on the case you are compressing those springs.
|
|
|
|
|
|