I have purchased a chinese bike from a man across the country

Adrenalcookie · 08-15-2019, 12:36 PM

So after many sleepness nights i have purchased a Boom lil duc from kronik racing, which im guessing is the same bike as the venom motorsports x21r. other than the fairings it seems to be the same bike as the vaders, So would the exhausts that you guys use for your vaders mount on the boom lil duc? Also would the stock chain fit the 17t sprocket or do i have to buy a new chain too?

RedCrowRides · 08-15-2019, 03:42 PM

Yep, the Boom is the same Bike as the X21R and RS .The exhausts that fit Vaders should fit no problem ,it is the same engine with the same exhaust port outlet angle.
As far as the chain goes., "most" stock chains will work with the 17t swap, you just have to adjust the rear wheel as far forward as it will go. I've only known one case where the stock chain was just too short ,and even then all he did was add an extra master link .The stock chain stretches a significant amount even if properly lubed and adjusted even over the first 50-100 miles so worst case is if it is just too short when you get it, run it a hundred miles and chances are it will fit fine.

Whisky · 08-15-2019, 05:31 PM

Welcome. I have same bike just with a few mods

PhildoScaggins · 08-15-2019, 08:34 PM

Quote:

Originally Posted by Whisky

Welcome. I have same bike just with a few mods

Lol, just a few

Glad you finally got your 190 in. I feel bad, my china bikes have been gathering dust in the basement all summer while I've been riding my 89 yamaha radian. Maine registration laws are strange for cycles so I decided to wait till next spring. I have been bummed out about the lack of content here as of late, but I need to remember everyone is out riding, and I've done nothing to contribute myself.

Adrenalcookie · 08-15-2019, 10:07 PM

Do you have the link to those tank grips?

Whisky · 08-16-2019, 01:38 AM

I've been spending most my time on the zs forum and clone army. Yeah 190 sat in the box for 5 months. It is ALOT of fun now, we'll worth it. I will post where I got the tank grips when I get off work as I will have to look around cuz I don't remember right off hand. Don't get me wrong, the 125 is lots of fun too but the 190 let's u Cruz at a much lower rpm and having 5 gears is a big plus. The swap is really easy to do.

Adrenalcookie · 08-16-2019, 10:01 AM

Thanks for the info guys, I’ve been looking at exhausts but I can’t find any bolt on high pipes, and how does the Honda Dax exhaust sound compared to the stock one?

Whisky · 08-16-2019, 12:08 PM

Exhaust from a Honda dax, z50, z70 are exhaust that will bolt right on to your engine. On clones the exhaust port on the head is at an angle, the exhaust port on a Honda Grom and ssr Raskull face straight down. Any aftermarket exhaust is going to be better then the restricted stock exhaust. Check motorkit.com they have several styles to choose from, I think they have a few high mount too.

Whisky · 08-16-2019, 12:38 PM

Quote:

Originally Posted by Adrenalcookie

Do you have the link to those tank grips?

Google Ducatti tank grip cover. Several different styles available.

08-15-2019, 12:36 PM	#1
Adrenalcookie Join Date: Jul 2019 Posts: 34	I have purchased a chinese bike from a man across the country So after many sleepness nights i have purchased a Boom lil duc from kronik racing, which im guessing is the same bike as the venom motorsports x21r. other than the fairings it seems to be the same bike as the vaders, So would the exhausts that you guys use for your vaders mount on the boom lil duc? Also would the stock chain fit the 17t sprocket or do i have to buy a new chain too?
	0

08-15-2019, 03:42 PM	#2
RedCrowRides Join Date: Jun 2018 Location: Florida Posts: 759	Yep, the Boom is the same Bike as the X21R and RS .The exhausts that fit Vaders should fit no problem ,it is the same engine with the same exhaust port outlet angle. As far as the chain goes., "most" stock chains will work with the 17t swap, you just have to adjust the rear wheel as far forward as it will go. I've only known one case where the stock chain was just too short ,and even then all he did was add an extra master link .The stock chain stretches a significant amount even if properly lubed and adjusted even over the first 50-100 miles so worst case is if it is just too short when you get it, run it a hundred miles and chances are it will fit fine. __________________ 2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L
	0

08-15-2019, 05:31 PM	#3
Whisky Join Date: Aug 2018 Posts: 286	Welcome. I have same bike just with a few mods __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

08-16-2019, 01:38 AM	#6
Whisky Join Date: Aug 2018 Posts: 286	I've been spending most my time on the zs forum and clone army. Yeah 190 sat in the box for 5 months. It is ALOT of fun now, we'll worth it. I will post where I got the tank grips when I get off work as I will have to look around cuz I don't remember right off hand. Don't get me wrong, the 125 is lots of fun too but the 190 let's u Cruz at a much lower rpm and having 5 gears is a big plus. The swap is really easy to do. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

08-16-2019, 12:08 PM	#8
Whisky Join Date: Aug 2018 Posts: 286	Exhaust from a Honda dax, z50, z70 are exhaust that will bolt right on to your engine. On clones the exhaust port on the head is at an angle, the exhaust port on a Honda Grom and ssr Raskull face straight down. Any aftermarket exhaust is going to be better then the restricted stock exhaust. Check motorkit.com they have several styles to choose from, I think they have a few high mount too. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks Last edited by Whisky; 08-16-2019 at 12:43 PM.
	0

08-15-2019, 10:07 PM	#5
Adrenalcookie Join Date: Jul 2019 Posts: 34	Do you have the link to those tank grips?
	0

08-16-2019, 10:01 AM	#7
Adrenalcookie Join Date: Jul 2019 Posts: 34	Thanks for the info guys, I’ve been looking at exhausts but I can’t find any bolt on high pipes, and how does the Honda Dax exhaust sound compared to the stock one?
	0