Clutch basket play

slowroller · 07-17-2018, 04:52 PM

Im chasing a problem with shifting. I pulled right cover and from what i can tell everything working as needed. When i was shifting i could see clutch basket moving alot. Anyone have trouble with then loose or are they suppose to float. Are they bushing or bearing style. What is torque on them?

pete · 07-18-2018, 01:06 AM

is the basket rivited to the back gear or is there a cushing unit....

..

slowroller · 07-18-2018, 03:11 PM

Im not sure at this point id say solid be weekend before my socket comes in to disassemble it. I was hoping the hawk masters were going to chime in. If not ill keep ordering parts till i fix it.

Megadan · 07-18-2018, 03:59 PM

To be honest, it isnt much to go off of. This is one of those situations where a video of what you are describing would say a lot more.

Also, iirc, these use a bushing instead of a roller bearing.

Kivi · 07-18-2018, 05:10 PM

There must be a play in clutch basket, if the engine design of your bike is similar to mine. Please, make a video of the play. My clutch has a lot of play.

pete · 07-19-2018, 01:46 AM

Quote:

Originally Posted by Kivi

There must be a play in clutch basket, if the engine design of your bike is similar to mine. Please, make a video of the play. My clutch has a lot of play.

sounds like yours needs looking at aswell...

.

ben2go · 07-19-2018, 09:08 AM

The shaft bearing behind the clutch could be going bad.

pete · 07-20-2018, 09:13 PM

Is the play rotatonal or side to side "wobble"...

..

NzBrakelathes · 07-26-2018, 12:17 AM

Too many possibilities - Video please
The basket can wear on the spline too, or bearing or... or ......

pete · 07-26-2018, 01:46 AM

Quote:

Originally Posted by NzBrakelathes

Too many possibilities - Video please
The basket can wear on the spline too, or bearing or... or ......

the basket is not splined to the shaft... the hub is...
the basket usaly runs on a bronze bush as it only rotates free of
the hub if the clutch pulled in... at any other time the basket and
hub rotate as one unit as they are connected by the clutch plates
and springs...

..

slowroller · 07-26-2018, 08:22 PM

Thanks for all the help im try to replace all parts and inspect wear and report back if any of that helps.

07-17-2018, 04:52 PM	#1
slowroller Join Date: May 2018 Posts: 77	Clutch basket play Im chasing a problem with shifting. I pulled right cover and from what i can tell everything working as needed. When i was shifting i could see clutch basket moving alot. Anyone have trouble with then loose or are they suppose to float. Are they bushing or bearing style. What is torque on them?
	1

07-18-2018, 01:06 AM	#2
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	is the basket rivited to the back gear or is there a cushing unit.... .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

07-18-2018, 03:59 PM	#4
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,017	To be honest, it isnt much to go off of. This is one of those situations where a video of what you are describing would say a lot more. Also, iirc, these use a bushing instead of a roller bearing. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	0

07-20-2018, 09:13 PM	#8
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	Is the play rotatonal or side to side "wobble"... .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

07-18-2018, 03:11 PM	#3
slowroller Join Date: May 2018 Posts: 77	Im not sure at this point id say solid be weekend before my socket comes in to disassemble it. I was hoping the hawk masters were going to chime in. If not ill keep ordering parts till i fix it.
	0

07-18-2018, 05:10 PM	#5
Kivi Join Date: May 2017 Location: Serbia Posts: 217	There must be a play in clutch basket, if the engine design of your bike is similar to mine. Please, make a video of the play. My clutch has a lot of play.
	0

07-19-2018, 09:08 AM	#7
ben2go Join Date: Jun 2011 Posts: 1,335	The shaft bearing behind the clutch could be going bad.
	0

07-26-2018, 12:17 AM	#9
NzBrakelathes Join Date: Jun 2016 Location: Hell Posts: 2,408	Too many possibilities - Video please The basket can wear on the spline too, or bearing or... or ......
	0

07-26-2018, 08:22 PM	#11
slowroller Join Date: May 2018 Posts: 77	Thanks for all the help im try to replace all parts and inspect wear and report back if any of that helps.
	0