08-31-2019, 09:07 PM | #1 |
Join Date: Jul 2019
Location: West Virginia
Posts: 5
|
Spacer for front wheel
Bought my 2017 hawk second hand and it seems to be missing a spacer in the front axle. Either missed in the original assembly or not shipped with the bike. If the axle is tightened the disc rubs. If it's loosened to where the wheel spins properly it's not tight at all. Anyone know where I can find only the spacer without buying a new wheel assembly? Or one sold for a different bike that's the same size? Perhaps a Honda?
|
|
08-31-2019, 11:32 PM | #2 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
|
|
09-01-2019, 07:11 PM | #3 |
Join Date: Jul 2019
Location: West Virginia
Posts: 5
|
Thanks
That's lovely it's called the shaft sleeve, on a related note do you know If the rear cargo rack matches bolts with the hawk?
|
|
09-02-2019, 07:49 AM | #4 | |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Quote:
From $30 to $40 posted to the USA Or if you want to use Ebay its more expensive and only the mid size listed |
|
|
09-02-2019, 09:50 AM | #5 |
Join Date: Nov 2017
Location: Marseille, France -> Conakry, Guinea
Posts: 1,481
|
Try switching which side the spacers are on, assuming it still has two? Sometimes they get mixed up.
|
|
09-02-2019, 11:27 PM | #6 | |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Quote:
Answers your question? |
|
|
09-04-2019, 11:53 AM | #7 |
Join Date: Jul 2019
Location: West Virginia
Posts: 5
|
It seems to only have one. The sites that sell the full wheel assembly only showed one
|
|
09-04-2019, 11:56 AM | #8 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,569
|
Should have one spacer on the rotor side.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
09-04-2019, 02:30 PM | #9 |
Join Date: Nov 2017
Location: Marseille, France -> Conakry, Guinea
Posts: 1,481
|
I'd give RPS a call, and either have a local machinist turn one up (if you can get specs from them), or just order one from there.
|
|
09-04-2019, 07:30 PM | #10 |
Join Date: Jun 2016
Location: Hell
Posts: 2,408
|
Peace sports in Atlanta I would say has what you need
|
|
|
|
|
|