09-12-2016, 11:16 PM | #1 |
Join Date: May 2015
Location: Houston area
Posts: 1,902
|
Elecrric impact wrench for CVT
I have a set of high performance rollers and torque spring to install in the CVT on my scooter. Installation requires an impact tool. I don't have an air compressor. Has anybody tried one of those electric impact drivers? They cost a lot less than a compressor.
http://www.harborfreight.com/power-t...nch-61173.html
__________________
"Its not WHAT you ride; its THAT you ride" |
|
09-13-2016, 02:14 AM | #2 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
I have the Harbor Freight electric impact and Harbor Freight black oxide impact sockets in metric and sae. It is a great tool and works perfectly. One thing I did do is remove the head of the tool and made sure all the gears were well coated in grease. Simple 4 screws I believe. I bought the tool, sockets, extensions, wobblers etc and keep it all together as a kit in one of the Harbor Freight tool bags. Very handy to have around.
http://www.harborfreight.com/12-in-h...nch-68099.html http://www.harborfreight.com/13-pc-1...set-69560.html http://www.harborfreight.com/13-pc-1...set-69279.html http://www.harborfreight.com/4-pc-12...set-67972.html http://www.harborfreight.com/3-piece...set-67066.html http://www.harborfreight.com/15-in-tool-bag-61469.html / Last edited by Adjuster; 09-13-2016 at 05:49 AM. |
|
09-13-2016, 02:18 AM | #3 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
By the way you also need to pick up one of the Harbor Freight pancake style air compressors. Unbelievably convenient to have for the $36.00 its going to cost you.
Always hold out for the Harbor Freight super coupons before purchasing anything. http://www.harborfreight.com/3-gallo...sor-95275.html http://www.harborfreight.com/20-pc-a...kit-68191.html http://www.harborfreight.com/18-gaug...ler-68019.html / Last edited by Adjuster; 09-13-2016 at 05:52 AM. |
|
09-14-2016, 12:06 AM | #4 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
Just for comparison the electric ones do work well and are usually good enough for many applications
Electric 230 ft lbs torque Pneumatic usually start at around 500 some less They used to be low but now they are available way up there past 1000 lbs Secret is, penetrate spray and let it soak in
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
09-16-2016, 10:04 AM | #5 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I have one. Well worth the money.
__________________
You meet the nicest people on a Honda Clone. |
|
|
|
|
|