08-01-2019, 10:00 AM
|
#1 |
|
Join Date: Jul 2019
Posts: 30
|
Front Fork Guard Apollo 250 DB36
So i tried to spray paint my front fork guard but messed up royally and for the life of me cannot find one that matches the apollo 250 db36. Anyone have any inclination to an exact OEM or another model that will work?
|
|
|
08-01-2019, 10:14 AM
|
#2 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,562
|
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
08-01-2019, 10:35 AM
|
#3 |
|
Join Date: Jul 2019
Posts: 30
|
yea i saw that one but I dont want to pay 50 bucks for fork guards. that seems a bit excesive
|
|
|
|
08-01-2019, 11:01 AM
|
#4 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,562
|
Can you post close up pictures? May be similar to the Brozz or Storm.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
08-01-2019, 11:09 AM
|
#5 |
|
Join Date: Jul 2019
Posts: 30
|
yup will do tonight
|
|
|
|
08-01-2019, 11:16 AM
|
#6 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,562
|
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
08-01-2019, 11:19 AM
|
#7 |
|
Join Date: Jun 2016
Location: Colorado
Posts: 1,107
|
I messed up painting my plastics many times, sand it off and try again. The right pant is key. I use krylon fusion and to avoid the dreaded crinkles I make sure to let the paint cure 24 hours between coats. You have to make sure the plastic is clean before you paint it so I wash mine with dish soap. At this stage my plastics look better then factory. What was the problem with your paint job?
__________________
Bashan Blaze Mods: Alloy Rim's, Muffler, Mukuni VM26 Carb, Foam Filter, Tachometer, Volt Meter,LED Headlight, LED Blinkers |
|
|
|
08-01-2019, 02:44 PM
|
#8 |
|
Join Date: Jul 2019
Posts: 30
|
i probably didn't sand well enough nor did i clean well enough. I used this spray but it was super runny and didnt stick
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
|
|
|
|
|
 |
|
|
Linear Mode
