high lift cam for CG engines?

alex_in_az · 09-16-2019, 04:41 PM

does anyone make either a higher lift cam or higher ratio rocker arms for the CG engines? is it not possible due to the single lobe design?

Wild Dog · 09-16-2019, 09:49 PM

Quote:

Originally Posted by alex_in_az

does anyone make either a higher lift cam or higher ratio rocker arms for the CG engines? is it not possible due to the single lobe design?

Yes they do make higher lift cam and higher ratio rocker arms for the CG engines. At least in South America

alex_in_az · 09-17-2019, 09:35 AM

Quote:

Originally Posted by Wild Dog

Yes they do make higher lift cam and higher ratio rocker arms for the CG engines. At least in South America

any chance you could give me a link to a site? I can't seem to find any on a google search.

franque · 09-17-2019, 11:13 AM

I've looked into it too, the Brazilians seem to be the most into hot rodding them, and I tried to contact them on a site, with no luck. I looked at something like this: https://motos.mercadolivre.com.br/pe...ao-cg-vareta-a

Weldangrind · 09-17-2019, 11:21 AM

I suspect they're getting those parts from China. The trick would be to figure out if it's on Taobao.

franque · 09-17-2019, 12:55 PM

I think that they're cheap enough that we could potentially, at their discretion, have a member from South America - hint - maybe @Wild Dog ? Get some and send them Northwards?

**JerryHawk250** · 09-17-2019, 12:59 PM

Quote:

Originally Posted by franque

I think that they're cheap enough that we could potentially, at their discretion, have a member from South America - hint - maybe @Wild Dog ? Get some and send them Northwards?

I like your thinking.

bogieboy · 09-17-2019, 02:20 PM

i second that sentiment... i wouldnt mind a 310 degree cam for my bike....LOL

OneLeggedRider · 09-17-2019, 03:50 PM

One of the best mods I did for my ATC 200X was a hot cam and exhaust, put out surprising amounts of power for a small displacement engine.

**JerryHawk250** · 09-17-2019, 03:52 PM

Quote:

Originally Posted by OneLeggedRider

One of the best mods I did for my ATC 200X was a hot cam and exhaust, put out surprising amounts of power for a small displacement engine.

Same here with my 200x.

I miss that bike.

Wild Dog · 09-17-2019, 11:20 PM

Quote:

Originally Posted by Weldangrind

I suspect they're getting those parts from China. The trick would be to figure out if it's on Taobao.

It's a 50 / 50, some parts are from china/taiwan some made either in Argentina or Brazil.
When it comes to vehicle mfg in South America, Brazil is #1 then is Argentina. If we take Latin America, then it's Brazil, Mexico, Argentina.
Honda, Yamaha, Toyota did invest a lot of money in SA. Toyota mostly in 4 wheels vehicles, while Honda and Yamaha mostly in motorcycles.
So there are mfg that make custom parts from 0.
Also you have tuned china stuff.

For example, right now i'm starting to buff out my chonda.
-alloy rims, locally made, a bit better than the chinese ones and cheaper

-Big bore kit, is made in Taiwan but resold under an Argentinian brand, the gaskets are made here.

-New Springs for the front fork, national made for chondas with different spring rates.

-Handlebar with raiser Brazilian made.

-Silencer, national made cloned from fmf.

-Cam brazilian made.

-Alloy skid plate national made.

Name: IMG_0697.jpg
Views: 608
Size: 93.2 KB

Name: IMG_0697.jpg
Views: 608
Size: 93.2 KB

Name: Clipboard01.jpg
Views: 619
Size: 32.9 KB

Name: IMG_0481.jpg
Views: 598
Size: 91.2 KB

Quote:

Originally Posted by franque

I think that they're cheap enough that we could potentially, at their discretion, have a member from South America - hint - maybe @Wild Dog ? Get some and send them Northwards?

If you find something you like, tell me. With the current money change. Parts are very cheap for those who earns in USD, Euros...

Just to give you an idea. I paid 20 usd for the alloy skidplate

OneLeggedRider · 09-17-2019, 11:34 PM

Dammit man.. I need all those things, like yesterday!!

OneLeggedRider · 09-17-2019, 11:36 PM

Tako you need to get on this..

2LZ · 09-17-2019, 11:47 PM

I wonder if NZ would feel so inclined to chime in here.

franque · 09-18-2019, 02:53 AM

I was thinking something like this: https://produto.mercadolivre.com.br/...2-43a2070f4660

And this: https://produto.mercadolivre.com.br/...2-43a2070f4660

But I wouldn't need the pushrods.

09-17-2019, 11:21 AM	#5
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I suspect they're getting those parts from China. The trick would be to figure out if it's on Taobao. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	2

09-17-2019, 11:47 PM	#14
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,092	I wonder if NZ would feel so inclined to chime in here. __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	1

09-16-2019, 04:41 PM	#1
alex_in_az Join Date: Aug 2013 Location: Goodyear, Arizona Posts: 407	high lift cam for CG engines? does anyone make either a higher lift cam or higher ratio rocker arms for the CG engines? is it not possible due to the single lobe design? __________________ 2020 Tao TBR7 9.3:1 PnP head CRF230F exhaust 4 degree advance key 290 degree cam Nibbi PE30 and cone filter Front fork brace
	0

09-17-2019, 11:13 AM	#4
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	I've looked into it too, the Brazilians seem to be the most into hot rodding them, and I tried to contact them on a site, with no luck. I looked at something like this: https://motos.mercadolivre.com.br/pe...ao-cg-vareta-a
	2

09-17-2019, 12:55 PM	#6
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	I think that they're cheap enough that we could potentially, at their discretion, have a member from South America - hint - maybe @Wild Dog ? Get some and send them Northwards?
	3

09-17-2019, 02:20 PM	#8
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,045	i second that sentiment... i wouldnt mind a 310 degree cam for my bike....LOL
	1

09-17-2019, 03:50 PM	#9
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	One of the best mods I did for my ATC 200X was a hot cam and exhaust, put out surprising amounts of power for a small displacement engine.
	1

09-17-2019, 11:34 PM	#12
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	Dammit man.. I need all those things, like yesterday!!
	1

09-17-2019, 11:36 PM	#13
OneLeggedRider Join Date: Nov 2018 Location: Stockport, Oh. Posts: 1,442	Tako you need to get on this..
	0

09-18-2019, 02:53 AM	#15
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	I was thinking something like this: https://produto.mercadolivre.com.br/...2-43a2070f4660 And this: https://produto.mercadolivre.com.br/...2-43a2070f4660 But I wouldn't need the pushrods.
	0