03-06-2017, 06:56 AM | #2 |
Join Date: Feb 2017
Location: NY
Posts: 170
|
i finally got mine installed yesterday, it works perfectly and looks awsome, i am gonna cut a spacer for the left side mount bolt to level it out you can see that i have a few old washers in there right now. and yes the mileage is still at zero, we had a high temp yesterday of 19 so the test ride got postponed for a warmer day. |
|
03-06-2017, 12:33 PM | #3 |
Join Date: May 2007
Location: Lac Du Flambeau, WI
Posts: 804
|
Quote:
Wow! That's the furthest off i have ever seen! Most level up with 2-3 washers. Double check your grommets are not smashed. They should be loose a bit. Use loctite on the cluster studs..... |
|
03-06-2017, 01:51 PM | #4 |
Join Date: Feb 2017
Location: NY
Posts: 170
|
the grommets are ok and i put loctite on every nut and bolt i could find on this bike. I ended up with a 3/16" spacer behind the mounting bracket. when i get a few minutes this week i will cut a tapered spacer to cover the entire back of the bracket. |
|
03-07-2017, 02:23 AM | #5 |
Join Date: May 2016
Posts: 32
|
How much are you selling them for? I ordered a hawk, but APSC told me they upgraded me to the enforcer. Once that arrives I'll have to see, but I'm sure I could make this hawk upgrade cluster work on the Bashan Enforcer.
Does it plug into the hawks harness directly? Or do you have to run your own wires for the tach signal, etc? |
|
03-07-2017, 02:47 AM | #6 |
Join Date: Nov 2016
Location: robertsdale alabama usa
Posts: 1,007
|
i think the enforcer has the digital dash
__________________
1991 harley heritage softail classic 2016 hawk kaw h1 400 tripple 13' long chopper in progress 2009 johnny pag bar hog 2004 hd electra glide ultra classic shriner edition 1997 harley davidson 1200 sportster 1972 harley davidson amf sx250 |
|
|
|
|
|