06-04-2022, 01:07 PM | #1 |
Join Date: May 2022
Location: Hampton
Posts: 12
|
X-pect clutch question
First let me start by saying new rider only 800 miles so far. All on my x-pect 22’ I stay off the highways but even only going 60 it is peppy and does well. My question is I’ve never adjusted a clutch on a motorcycle. In first gear with the lever pulled the motorcycle pulls and this is the primary reason i sometimes stall out at intersections. Is there a guide of how to do it? Or should you basically tighten the cable till there is no longer any pull in first. I’m asking because when I did. My msf they had my on an enduro and it did the same thing. I’ve read alot of what people said about finding neutral I can only if it’s off or the bike is moving. Stopped it jumps past it
|
|
06-04-2022, 04:02 PM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,040
|
CSC Has a pretty decent guide on how to adjust the clutch on the TT250, which is more or less the same for all of these bikes. The guide itself also covers cable routing/install, so just read ahead to get to the adjustment part.
http://californiascooterco.com/blog/?p=20046
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|