08-28-2013, 09:51 AM
|
#1 |
|
Join Date: Aug 2013
Posts: 3
|
long case engine in short case frame? 139qmb 50cc
Will it work? My engine has blown but have found a cheap long case engine, just want to know if it will fit?
|
|
|
08-28-2013, 10:24 AM
|
#2 |
|
Join Date: Aug 2013
Location: NYC
Posts: 30
|
its going to take some work to make it work , you need to make sure the brackets line up . the spacing is the same. It could be more work than it is worth .
John |
|
|
|
08-28-2013, 06:43 PM
|
#3 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I think the most imported part would be the motor mounts. The rear shock can be adapted. Also make sure your rear wheel fits. Then you also may need longer brake linkages. This is if it fits under the bodywork.
__________________
You meet the nicest people on a Honda Clone. |
|
|
|
09-06-2013, 11:26 AM
|
#4 |
|
Join Date: Aug 2013
Posts: 3
|
Thanks guys. It worked. The only difference between the 2 was one inch.
So the wheel was 1 inch further back. Everything fitted fine. |
|
|
|
09-08-2013, 02:41 PM
|
#5 |
|
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Sounds good. We don't get alot of scooter info.
__________________
You meet the nicest people on a Honda Clone. |
|
|
|
|
|
 |
|
|
Linear Mode
