![]() |
#1 |
Join Date: Oct 2014
Posts: 187
|
Attaching FR Light and RR Light, Odometer. Light Switch
If I went out and bought for my bike
"Odometer" --> (shows speed/RPMS/Lights ON/Gears) FR Light (any Brand) RR Light (any Brand) Light Switch Will it work for any wiring setup for any brand names out there? Do I need to stick with the same kind of brand that made the bike? Is there anything else I need to add to the bike to get these items to work properly? Thanks for the info please help. |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
What do you mean by FR light and RR light?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#3 |
Join Date: Jan 2011
Location: Chilliwack, B.C., Canada eh
Posts: 1,393
|
in my world FR & RR means front right and rear right
__________________
I could be wrong......it has been known to happen<div><br /></div><div>core directive 172: No member of the core shall report for duty wearing a ginger toupee</div> |
![]() |
![]() |
#4 |
Join Date: Oct 2014
Posts: 187
|
Sorry
Front Light, and Rear Light. haha. Sorry. No excuses but I should take more time proof reading. Not a very good speller/grammer. Bare with me please. hehe
![]() |
![]() |
![]() |
#5 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Mine too, hence my question.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#6 | |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Quote:
I recommend that you buy the switch that Spud recommended to you. The speedometer will be another matter. Most of them are inaccurate, so a good alternative is a cheap bicycle speedometer. eBay is a good source for that as well.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
![]() |
![]() |
#7 |
Join Date: Oct 2014
Posts: 187
|
Thanks again
Yes Ill do some more searching, I will take another look at the light switch Spud mentioned. I don't really care how fast I go because I'm still learning. I would rather see what the RPMS when idle and shifting gears etc, plus the main thing is showing what gear I am in and what gears I shift too. Is there a thing out there that will show me this? Do I really need it? does it cost a lot of money? My manual says gear sensors but is that a easy thing to setup. My new jet (A and B) will be coming in soon, I have the carb already and getting excited to install it. I will keep you posted as well when I do it ill take a lot of pics for other people to see the process of it.
Thanks again guys for all the info. |
![]() |
![]() |
#8 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Does your engine have two sets of wires coming out of the left engine case? One of these is for the gear sensor.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#9 |
Join Date: Oct 2014
Posts: 187
|
Yes!
I'll take a picture soon and show you, the wires are white and green. So your saying these wires are to hook up for the sensor for the gears? I did buy a small little odometer, it came with a wire that I will need to hook up to the front tire area to show me my speed. I'm not to sure if I will need anything else.
|
![]() |
|
![]() |
![]() |
|
|