03-07-2018, 07:20 PM | #1 |
Join Date: Sep 2017
Posts: 2
|
hawk 250 uni pod filter
will this filter fit the hawk and not require you to remove the airbox? Not alot of info on the topic. But from all of the forums and youtube videos i've watched I think this might be a perfect fit (and cheap!)
https://www.amazon.com/gp/product/B0...S1KX1L2P&psc=1 |
|
03-07-2018, 07:57 PM | #2 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,028
|
You can leave the airbox on with that one. It will just slightly touch the lid seam on the inside edge, but it wont hurt performance. I have one on my hawk with the air box in place still.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
03-08-2018, 02:59 PM | #3 |
Join Date: Sep 2017
Posts: 2
|
will it increase performance? (leaving the airbox in place and uni installed). also the 15 degree turnout or 30 degree (like the one in the link).
|
|
03-08-2018, 04:09 PM | #4 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,028
|
It will help put a bit of pep in its step. Not any more than a modded airbox lid though. I have done both, and felt not change between them.
As far as the angle, the 30 fits betwren the side panel and frame better.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
|
|