New exhaust

Whisky · 10-13-2018, 07:40 PM

Wanted to try something else with a different tone. I like this one better.

Chinabike · 10-14-2018, 01:22 AM

Looks great, what exhaust is it. Hows it sound, loud?

Whisky · 10-14-2018, 02:52 AM

Quote:

Originally Posted by Chinabike

Looks great, what exhaust is it. Hows it sound, loud?

It's this one. I left the baffle in so it's not very loud now. With out the baffle it's fairly loud.
https://www.amazon.com/Honda-Aodonly...499727&sr=8-13

Vx21rsjohn · 10-14-2018, 10:56 PM

Quote:

Originally Posted by Whisky

It's this one. I left the baffle in so it's not very loud now. With out the baffle it's fairly loud.
https://www.amazon.com/Honda-Aodonly...499727&sr=8-13

I have the same exhaust just different color. How do you take the baffle out?

wheelbender6 · 10-15-2018, 12:46 AM

Looks great on the lil Monster.

Whisky · 10-15-2018, 01:50 AM

Quote:

Originally Posted by Vx21rsjohn

I have the same exhaust just different color. How do you take the baffle out?

I'm not sure but I think it's on the end where it connects onto the pipe. I didn't look into it when installing as I wanted something a little quieter then the exhaust I had on it before.

scoot newb · 10-18-2018, 02:46 AM

Looks sick! Were you able to resolve the carb issue?

Liamsdad · 10-18-2018, 05:35 AM

Will this bolt right up to a Hellcat? Been through 2 exhausts and neither fit.

Whisky · 10-18-2018, 02:07 PM

Quote:

Originally Posted by scoot newb

Looks sick! Were you able to resolve the carb issue?

Yes finally, what a headache that was. I ended up using #100 jet after trying #95-125. My high/no idle issue ended up being a simple fix by adjusting idle cable on the handlebars first then setting idle on carb. Runs great now, starts right up.

Whisky · 10-18-2018, 02:14 PM

Quote:

Originally Posted by Liamsdad

Will this bolt right up to a Hellcat? Been through 2 exhausts and neither fit.

No it wont, you need to heat up and bend the pipe in a couple placed. Here's a link of exhaust that bolt right up with no modifications needed.

https://www.motorkit.com/en/5677-exhaust-onder?p=1

I had this one on first
https://www.ebay.com/itm/Stainless-S...72.m2749.l2649

Here's a pic. This one as a larger diameter then the AR. Its a nice looking exhaust, I just wanted a lower tone then this one has. When/if I get bored with the AR maybe I will go back to this one.

Vx21rsjohn · 10-30-2018, 12:19 AM

@whisky what carb are you running? Haven't been able to ride my bike for a while since I didn't do my mods in order. Bike books and dies at WOT. I knew nothing about carbs before this bike.

Whisky · 10-30-2018, 09:16 AM

Here's the one I ended up using with a #100 jet. I tried jet#90 all the way up to 125 and the 100 ran the best. What type of cone air filter you are running plays a big part as far as tuning goes. It took me awhile to get it to run right but now it runs great and have no worries of the bike leaving me stranded like it did before.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

When I was having running issues I thought it was the carb so I purchased a genuine Mikuni carb for $150. but had the same issue as this $35 one had. It was a jet/tuning issue and the carb listed works great even at the low price.

Vx21rsjohn · 10-30-2018, 12:19 PM

Quote:

Originally Posted by Whisky

Here's the one I ended up using with a #100 jet. I tried jet#90 all the way up to 125 and the 100 ran the best. What type of cone air filter you are running plays a big part as far as tuning goes. It took me awhile to get it to run right but now it runs great and have no worries of the bike leaving me stranded like it did before.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

When I was having running issues I thought it was the carb so I purchased a genuine Mikuni carb for $150. but had the same issue as this $35 one had. It was a jet/tuning issue and the carb listed works great even at the low price.

That's the one I've been looking at. Hope it solve the problem I'm having. Been left stranded three times because it wouldn't start again.

Whisky · 10-30-2018, 03:15 PM

Didn't start but would turn over right? I had to buy a better battery because the one that came with the bike was bad also the sparkplug that it came with was junk as well. Do you have a thread telling about the issues you are having? This forum/members has been a lot of help for sure working through all the issues I have had.

Vx21rsjohn · 10-30-2018, 03:40 PM

Quote:

Originally Posted by Whisky

Didn't start but would turn over right? I had to buy a better battery because the one that came with the bike was bad also the sparkplug that it came with was junk as well. Do you have a thread telling about the issues you are having? This forum/members has been a lot of help for sure working through all the issues I have had.

I can get it to start no problem, but I can only ride it for short distances. It bogs and dies in the mid to full throttle range.

10-15-2018, 12:46 AM	#5
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	Looks great on the lil Monster. __________________ "Its not WHAT you ride; its THAT you ride"
	0

10-30-2018, 09:16 AM	#12
Whisky Join Date: Aug 2018 Posts: 286	Here's the one I ended up using with a #100 jet. I tried jet#90 all the way up to 125 and the 100 ran the best. What type of cone air filter you are running plays a big part as far as tuning goes. It took me awhile to get it to run right but now it runs great and have no worries of the bike leaving me stranded like it did before. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 When I was having running issues I thought it was the carb so I purchased a genuine Mikuni carb for $150. but had the same issue as this $35 one had. It was a jet/tuning issue and the carb listed works great even at the low price. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

10-30-2018, 03:15 PM	#14
Whisky Join Date: Aug 2018 Posts: 286	Didn't start but would turn over right? I had to buy a better battery because the one that came with the bike was bad also the sparkplug that it came with was junk as well. Do you have a thread telling about the issues you are having? This forum/members has been a lot of help for sure working through all the issues I have had. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

10-13-2018, 07:40 PM	#1
Whisky Join Date: Aug 2018 Posts: 286	New exhaust Wanted to try something else with a different tone. I like this one better. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

10-14-2018, 01:22 AM	#2
Chinabike Join Date: Jan 2018 Posts: 361	Looks great, what exhaust is it. Hows it sound, loud?
	0

10-18-2018, 02:46 AM	#7
scoot newb Join Date: Sep 2018 Posts: 403	Looks sick! Were you able to resolve the carb issue?
	0

10-18-2018, 05:35 AM	#8
Liamsdad Join Date: Oct 2018 Posts: 18	Will this bolt right up to a Hellcat? Been through 2 exhausts and neither fit.
	0

10-30-2018, 12:19 AM	#11
Vx21rsjohn Join Date: Oct 2018 Posts: 38	@whisky what carb are you running? Haven't been able to ride my bike for a while since I didn't do my mods in order. Bike books and dies at WOT. I knew nothing about carbs before this bike.
	0