[david3921]

By the way, I went out and traced the wires in case someone needs the info. Again, this is a Taotao 125cc and the plug that we were looking at is the where the start button connects to. I made a mistake in an earlier post by saying that some of the wires went to the switch. None do. Sorry about that.

Anyway, here's what color the wires are and where they went;

Black/White to a bundle of 3 1 to the rear tether, 1 to the CDI, 1 to the remote box
Brown to the tail light (!)
Yellow splits to 2, 1 to the stator, 1 to the regulator
Yellow/Red splits to 2, 1 to the starter relay, 1 to the remote box
Yellow/Green splits to 2, 1 to the rear brake switch, 1 to the front brake switch

My new wiring came in the mail today. I'll start a new post once I dig into that. My hope is that one of the harnesses does not have the plug for the remote and I can just swap in the new one and be able to start the ATV by the handle bar start button.