I took the hose off the vacuum port on the intake and cut a 1/4" off or so to make it fit on the nipple tighter. It seemed better but I ended up buying a Taiwan carburetor from GoPowerSports and installed it. I got the one with the bigger jets. It still doesn't start right up cold, takes a few attempts but it straightens out quickly. I can't expect too much since the kart sat for a good while. I took a gamble on it since everything from the factory was still there. I ended up taking the motor apart again to replace the crank seal on that side. Should have changed it when it was apart the first time. Oh well.
Thanks
|