Quote:
Originally Posted by DaytonaMike
What about specific metric sizes? Anything odd other than the 30mm mentioned?
|
You'll want:
Sockets:
8mm socket or ratcheting wrench
10mm socket or ratcheting wrench
12mm socket or ratcheting wrench
14mm socket or ratcheting wrench
18mm socket (left side of rear axle, left side front axle)
19mm socket (right side of rear axle)
3/8" ratchet
1/2" ratchet
You'll want
Allen Wrenches or sockets in the following sizes:
4 mm (some of the body panels)
5 mm (most other Allen head bolts)
6 mm (I
think I used this once... can't recall)
And for
screwdrivers:
Phillips
Flat head (long and short lengths)
I think that, along with the 30mm socket, will be most of what you'll want to have on hand.
As for mallet... I have both a steel, brass hammer... but for most automotive and motorcycle related uses, I use a hammer I have that has a rubber and urethane head (rubber one side, urethane on the other.) I keep the steel and brass hammers for punch/metal work.