|
First, add a relay control to your stock high beam AFTER the high/low switch for the stock high beam. Then wire a second relay in parallel for your auxiliary circuit. OEM switch and wires will handle 2 relays easy. One switch, both circuits. You can then run your auxiliary relay control circuit through your right side switch to break the auxiliary circuit when you don't want to run them with the high beams. Result is high beam will be on the stock switch, auxiliaries will also be on the stock switch, but the second switch will also have to be on to illuminate them. That way all three will dim for incoming traffic, a very kind and thoughtful idea. Thank you.
I should post drawings of such things. Same questions over and over.
|