|
for those that have messed with the preload and want it to have full use of the shock stroke I suggest raising the bike and get the rear wheel off the ground
and then move the pre-load nuts to the top of the spring and then lock them down there....
it's not the best solution but it will give you the full stroke of the short shock
as far as sag..... this bike doesn't have any sag ! the spring is too hard for that
a weaker spring is needed..... and that is where I am at right now!
if I find one I will let ya all know all the details of the spring... because this has been a bitch to discover on my own !
.....
Bob.......
__________________
It's too late when you've gone too far !
|