ChinaRiders Forums - View Single Post - One more noob buying a Rhino

FLASHLIGHTBOY · 10-31-2017, 03:02 PM

yes you can drill the screws out and replace them with new ones. other than having to clean the jet ( only of you use regular gas ) using premium will let it not plug up... th e brass cover is good to remove.. drill a little hole.. use a o ring pick and pry it off.. this is for just the air mix on idle.. or on the float bowl comment if you want t o change the jets,, then do so..... I see on the EPA carbs the plunger needle is non adjustable now... no extra slots to lower or raise the plunger... crazy.. have to use very small washers to get extra fuel for start up

10-31-2017, 03:02 PM	#42
FLASHLIGHTBOY Join Date: May 2009 Location: SASKATOON Posts: 1,161	screws yes you can drill the screws out and replace them with new ones. other than having to clean the jet ( only of you use regular gas ) using premium will let it not plug up... th e brass cover is good to remove.. drill a little hole.. use a o ring pick and pry it off.. this is for just the air mix on idle.. or on the float bowl comment if you want t o change the jets,, then do so..... I see on the EPA carbs the plunger needle is non adjustable now... no extra slots to lower or raise the plunger... crazy.. have to use very small washers to get extra fuel for start up __________________ DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC
	1