ChinaRiders Forums - View Single Post

Angus67 · 12-30-2017, 08:56 PM

So i had alittle time today. Turned the idle mix back to 1 and 1/4. I got closer to a steadi idle. And the idle adj screw is actually doing ng something now. I felt that the idle mix screw was way too easy to turn, so in my box of carb trix, I found a spring with same dia of coils, but one coil longer.
So i gor it to idle lower thistime, but its still surging. Tomorrow i will check the valves again. When i did them a cew weeks ago, i found it was quite cumbersome to do the intake valve. But if this is the prob, i will check again tomorrow to eliminate a tight valve.

12-30-2017, 08:56 PM	#110
Angus67 Join Date: Oct 2017 Location: shelton, Washington Posts: 167	So i had alittle time today. Turned the idle mix back to 1 and 1/4. I got closer to a steadi idle. And the idle adj screw is actually doing ng something now. I felt that the idle mix screw was way too easy to turn, so in my box of carb trix, I found a spring with same dia of coils, but one coil longer. So i gor it to idle lower thistime, but its still surging. Tomorrow i will check the valves again. When i did them a cew weeks ago, i found it was quite cumbersome to do the intake valve. But if this is the prob, i will check again tomorrow to eliminate a tight valve. __________________ 2006 roketa 200cc 1971 Yamaha xs650 2x 1980 xs650, 1 is a café, other is a chopper/brat 1972 Honda xl250 2x early 90's Honda rf600 parts bikes more mc junk laying around.
	0