ChinaRiders Forums - View Single Post - 2nd Generation, CSC Center Stand: Installation

rtking · 02-01-2016, 05:48 PM

Congrats George!

Oh, I get excited any time I get to play with power tools.

But in the center stand's case (at least on my bike), it only needed a Dremel with a sanding drum to get the clearance needed for the stand to rotate.

I will say that trying to stretch the spring by pulling backwards is pretty difficult. Definitely use the spring perch as a lever point on the flat head screwdriver to get the spring to stretch and seat on the perch.

02-01-2016, 05:48 PM	#49
rtking Join Date: Sep 2014 Location: Orange County, CA Posts: 410	Congrats George! Oh, I get excited any time I get to play with power tools. But in the center stand's case (at least on my bike), it only needed a Dremel with a sanding drum to get the clearance needed for the stand to rotate. I will say that trying to stretch the spring by pulling backwards is pretty difficult. Definitely use the spring perch as a lever point on the flat head screwdriver to get the spring to stretch and seat on the perch.
	1