[Co2]

Originally Posted by SpudRider

Okay. The Honda, fiber clutch plates are okay, but the metal clutch plates are too thick.

When you have time, please do measure the thickness of the metal clutch plates in your engine. Also, please measure the thickness of the Honda, fiber clutch plates. We are happy to wait. Take your time, we are not in a hurry.

Originally Posted by Co2

116 mm ( in chamber , non tooth.) , 9 mm(in circle to out walls non toth) , 136 mm (out chamber) Dimensions of the metal plate.

116 mm ( in chamber , non tooth.) , 9 mm(in circle to out walls non toth) , 136 mm (out chamber) Dimensions of the metal plate.

http://hizliresim.com/4LQO6A

Metal and clutch original fiber same dimensions.. , nx 650 clutch bit bigger..... but worked.



Right is original, left is Honda nx 650 dominator EBC ck1170

Diff is original end Honda clutch.

Original chamber in : 117 milimeter.

Original out of chamber (not teths/tooths.) : 136 milimeter

Original out and in chamber wall (not teths/toots.) : 9 milimeter

-------------------------------------------------------------------------

Honda dominator clutch chamber in : 116 milimeter


Honda dominator out of chamber(not teths/tooths.) : 138 milimeter

Honda dominator out and in chamber wall (not teths/toots.) : 11 milimeter.


My moto in " METAL PLATE " Dimensions same to original clutch plate 1-1 same dimens..

İ hope now ok.