Having adjusted the spring preload, replace the battery box. Then, attach the evaporative canister to the bottom of the battery box. Replace the battery. Then return the side cover panel to its original position. Finally, replace the wheel. Lower the bike from the jack or center stand, replace the black panel covering the battery, and replace both saddles. With the bike fully assembled, you are ready to take a ride to test the shock absorber with the increased spring preload.
Repeat this entire procedure, either tightening, or loosening the shock spring preload, until the shock absorber performs as you desire.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
|