07-31-2019, 01:38 PM
|
#10
|
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,552
|
Quote:
Originally Posted by crackerjac
Out of curiosity, what did you set your float height at? I know the proper way is to use a tube off the float bowl but there is no nipple on these so unless I get another cap for the bottom and drill and tap a fitting to do the tube method I just followed the OKO sites method and set it to 21mm, which appears to be a similar carb.
http://www.mid-atlantictrials.com/Instal.html |
I just turned the carb upside down and made sure the seam of the float was parallel with the carb body.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel
|
|
|
|