Quote:
Originally Posted by NoVa Rider
............. Correction on June 6: The OEM wire has a crimped fitting that goes over the post in the coil; not sure how well this post would work as a "screw" into a bare spark plug wire.
|
Guess we will find out....
I don't know about Jay's guess of a graphite embedded thread for the ignition wire.
Should I be able to see the graphite?
I looks to me like just a piece of string with a thin wire coiled around it.
I purchased some real low tech ignition wire....stranded steel:
After I removed the stock wire from the coil, I twisted the new wire on until it bottomed out....it seems like a solid connection.
Then did the same with the new NGK spark plug cap.
I've been riding for two days on and off pavement. There seems to be no difference in operation of the bike.
We will see how long it lasts.
jb