Quote:
Originally Posted by Diggy
When I get the Headlight and Tail Light in with the switch it comes with, modifying the connectors, the connectors on the bike needs to be modified as well, or just the ones on the lights / switch?
For example, I know that my headlight on the bike has 4 wires for its connector.. can you give me some examples what you mean by modifying these bad boys when they come in
At the back of my bike now, I have I believe a 3 wire connector and then the rest are single wires, I believe for the signal lights. I am not yet putting signals blinkers on the bike yet, just the rear and front light.
|
You need to hook the three appropriate wires from you wiring harness to an H4 connector. The H4 connector will plug into the bulb which comes with your headlight. You can buy an H4 connector at eBay, or at any auto parts store.
http://www.ebay.com/itm/2Pcs-H2-H4-9...63c8f0&vxp=mtr
After you install the tail light/brake light, you need to connect the three appropriate wires together. I solder spade connectors to the wires so I can hook them together.
http://www.oreillyauto.com/site/c/de...ade+connectors
http://www.oreillyauto.com/site/c/de...ade+connectors
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894