ChinaRiders Forums - View Single Post - Adding brake lights with 4-wire turn signals

detours · 06-04-2016, 04:16 PM

At last, I got the connectors I ordered and was able to finish installation of my 4-wire LED signals. This part was really simple and they work great!

If you wanted, you could do the whole thing with quick splices. But I hate to cut stock wiring unless I have to. This way, everything is easily disconnected if something fails or I need to remove it.

Here's the parts list:

Triple 3.5mm bullet terminal kit ... click here for ebay link. Or search for 'Triple 3.5mm Bullet Terminal with insulators' if the listing expires.
2-4 inches of 16 gauge automotive wire (auto parts store)
1 x 16 gauge (blue) quick splice connector (auto parts store)
Electrical crimping pliers
Small knife

Here's a link to my turn signal installation guide. It's time-consuming because you have to take the tail end apart to access the bolts.

http://www.chinariders.net/showthread.php?t=16749

06-04-2016, 04:16 PM	#1
detours Join Date: Sep 2014 Location: Arvada, CO Posts: 1,004	Adding brake lights with 4-wire turn signals - Part 2 At last, I got the connectors I ordered and was able to finish installation of my 4-wire LED signals. This part was really simple and they work great! If you wanted, you could do the whole thing with quick splices. But I hate to cut stock wiring unless I have to. This way, everything is easily disconnected if something fails or I need to remove it. Here's the parts list: Triple 3.5mm bullet terminal kit ... click here for ebay link. Or search for 'Triple 3.5mm Bullet Terminal with insulators' if the listing expires. 2-4 inches of 16 gauge automotive wire (auto parts store) 1 x 16 gauge (blue) quick splice connector (auto parts store) Electrical crimping pliers Small knife Here's a link to my turn signal installation guide. It's time-consuming because you have to take the tail end apart to access the bolts. http://www.chinariders.net/showthread.php?t=16749 Attached Images __________________ Red 5 standing by! 2015 CSC red RX3 with 19" front wheel, Shinko 804/805, skid plate, tall seat, 13T/45T sprockets, progressive shock, Winyoochanok windshield, GENSSI LED headlight, SW-Motech tankbag, Shorai Lithium battery 2014 Ural Patrol Last edited by detours; 06-07-2016 at 09:02 AM.
	0