ChinaRiders Forums - View Single Post

fjmartin · 09-26-2017, 09:17 PM

I used the genssi elite LED. Available on eBay for $30. Didn’t have to drill anything out, just had to leave off the rubber boot right behind the bulb but no water can get in there anyway. The ballast fits in the housing behind the built and the heat sink is reversible to make it fit. This light has a great low beam cutoff and the ability to tune its position in the housing which allowed me to get a great beam pattern for both low and high beam.

09-26-2017, 09:17 PM	#10
fjmartin Join Date: Sep 2016 Location: Redmond, WA. Posts: 534	I used the genssi elite LED. Available on eBay for $30. Didn’t have to drill anything out, just had to leave off the rubber boot right behind the bulb but no water can get in there anyway. The ballast fits in the housing behind the built and the heat sink is reversible to make it fit. This light has a great low beam cutoff and the ability to tune its position in the housing which allowed me to get a great beam pattern for both low and high beam. __________________ 2017 BMW F800GS Adventure
	1