|
I'll Do the easy answers first . No need to use the tach wirews for it to run .
I am not using any vacume ports ,it's pluged off .
Now the Wires from the case . Blue and green wires are needed for your timing pickup , It is AC ,But the controller converts it to DC for the CDI.
I have 3 other wires from the engine case , Pink , Yellow , Black with red tracer . You'll see in the pictures Only the pink and yellow going to the voltage regulator /rectifier . 2 other wires at the voltage regulator /rectifier are green ,that will be a ground and the red will be dc voltage output i.e. 12v
|