ChinaRiders Forums - View Single Post - Zongshen RX3: 21-inch Front Wheel

SpudRider · 03-21-2017, 10:27 PM

The center stand performed the same with the 21-inch front wheel, as long as I placed a 3/4-inch board beneath the feet.

However, I decided to weld two, 1.25-inch extensions to the feet of the center stand. Now I don't need to worry about placing anything beneath the center stand.

I also welded a 1.25-inch extension onto the side stand of my RX3.

03-21-2017, 10:27 PM	#46
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	The center stand performed the same with the 21-inch front wheel, as long as I placed a 3/4-inch board beneath the feet. However, I decided to weld two, 1.25-inch extensions to the feet of the center stand. Now I don't need to worry about placing anything beneath the center stand. I also welded a 1.25-inch extension onto the side stand of my RX3. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 Last edited by SpudRider; 04-09-2017 at 02:00 AM.
	0