Quote:
Originally Posted by 4rvid
Original bronze bushing is (id x od x length) 25x28x26mm. It's mounted to clutch basket...
|
Quote:
Originally Posted by 4rvid
...That part #2 is steel sleeve 20x25x26 and it mounts to transmission mainshaft. So the installation order is transmission main shaft => steel sleeve => bronze bush and clutch basket.
At AJP part list there is same picture as RX3 part list. And part #2 is steel sleeve 20x25x26 and part number is 22104-ME30-0000 so it's a same part.
Correct needle bearing is 25x28x26 to replace AJP bronze bushing. If 25x29x26 bearing fits to RX3 then it has to have bigger hole on the clutch basket.
|
As I said, I have not removed the clutch basket on my RX3 to verify the dimensions of the needle bearings. I am using the measurments provided by forum member Riceburner.
I would call CSC and ask them the dimensions of the clutch bearings, and whether the RX3 uses a different clutch basket.
However, I know the CSC employees are currently
very busy assembling and crating a shipment of new motocycles for delivery.
__________________
Spud
"Never argue with an idiot. He will drag you down to his level, and beat you with experience."
Mark Twain
2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220
Mods made to my Zongshen ZS200GY-2:
http://www.chinariders.net/showthread.php?t=6894