|
Original bronze bushing is (id x od x length) 25x28x26mm. It's mounted to clutch basket. That part #2 is steel sleeve 20x25x26 and it mounts to transmission mainshaft. So the installation order is transmission main shaft => steel sleeve => bronze bush and clutch basket.
At AJP part list there is same picture as RX3 part list. And part #2 is steel sleeve 20x25x26 and part number is 22104-ME30-0000 so it's a same part.
Correct needle bearing is 25x28x26 to replace AJP bronze bushing. If 25x29x26 bearing fits to RX3 then it has to have bigger hole on the clutch basket.
|