View Single Post
Old 11-01-2016, 08:00 AM   #15
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,539
Quote:
Originally Posted by hertz9753 View Post
https://www.amazon.com/JT-Sprockets-...n+hdr+130+link

That is what I run with a 16/44 combo.
I looked at them but going with an o-ring chain. Where I ride it has a lot of very fine river sand and when that stuff is wet it gets all up in the chain. I have one on my Honda 200x and never had to worry about it. I would just hose it off and oil it up. The O-rings keeps the sand out of the bearings of the chain. I didn't have any problems with the chain stretching either. 1st trip we made with my 4 wheel the sand ate the crap out of her chain inside and out. You could literally heard the grains of sand grinding away at it. Got an o-ring chain and no problems since. well worth the extra money. IMO the cheapest o-ring chain out there is about 100 times better than a regular chain.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote