[No1Vic]

I've dug out an old laptop running Windows XP and installed PCHUD and got it running using Katflaps HUB and PAR files.... will be testing it with my homemade lead and an old ELM327 KW2000 interface sometime today. You never know it just might work :-)




Tried my interface and lead this afternoon but no joy. On a plus side pulled the connectors off the stepper motor, reconnected them securely and the bikes running fine now from cold start no more surging or uneven idle, must have been a poor connection. Another thing I noticed if you just turn the ignition on and wait 60 seconds the engine fault light starts flashing any stored codes without using the on, off,on,off,on ignition cycle.