Quote:
Originally Posted by hect75
The stripped bolts are those holding the carb bowl. I used the dremel and flat screwdriver to take them off. I removed the main jet and took it to the shop but nobody sells this guy. On the other hand, Honda (according to Spud's suggestion) sells the oil seal fork for $30 each one which I think is very expensive. Is there another model or what about the seals that use the TW200? maybe they're cheaper than the Honda ones.
|
you might be able to buy a commercial equivalent part from your local SKF dealer. these seal are stock parts, you just have to know what the part # is. measure the outside and inside diameters and the thickness then look for the same dimensions here
http://www.skf.com/binary/21-129139/...10919_2-EN.pdf
when you find the part # you should be able to order it from an industrial supply store. I recently bought some 35mmx25mmx4mm oil seals for about $6 each. I would think the fork oil seals are similar.